|
Title: S+ Slant Top - Help with Coin Comparitor Post by: marcun on September 14, 2012, 06:01:02 PM Hello all, new to the forum and just bought my first machine. It's an IGT s+ slant top double diamond machine. It seems to work well except the coin mech isn't fully functional. It seems to have all the parts but the comparitor is not installed, it's loose. I installed it but don't see the wiring that connects to it or where it would plug from the comparitor to the machine.
Also, the machine is missing the whole dollar bill assembly. I don't have a need to get this functioning but would like to get a faceplate and make it light up. Any recommendations on where to get the face and if you can luminate it without the rest of the guts? Thanks, Nathan Title: Re: S+ Slant Top - Help with Coin Comparitor Post by: marcun on September 14, 2012, 06:07:35 PM Some more information, the unit with the test button that adds credits for testing is just dangling. Not sure if this gets installed with the coin comparitor or if it gets installed elsewhere. It is wired and works but i'm guessing it's not supposed to be hanging loosely in the cabinet.
Title: Re: S+ Slant Top - Help with Coin Comparitor Post by: Buzz on September 14, 2012, 07:06:23 PM Nathan :238- :254-
Pictures, pictures we want pictures. The part that's dangling is I think the coin optics, as I recall it's suppose to have a couple of small screws holding it to the back plate. I'm assuming the 4 plastic ears that hold the coin comparator is place are there. The BV bezel, I have a whole bunch of them ane your more than welcome to one. The only thing is you have to have the complete BV assembly because the bezel attaches to the head. I have a whole bunch of DBV 200 and transports, give me some time and see if any of them are any good. Your going to have to open the top box ( glass ) and see if you have the power supply for the BV. Above and behind the #2 reel you can feel a small knob, press in on the glass frame work and pull down on that knob at the same time. The power supply will be on your right, right next to the BV. ( No power supply = no light in the bezel ) I'm not sure if I have a CC pig tail or not. Title: Re: S+ Slant Top - Help with Coin Comparitor Post by: rickhunter on September 14, 2012, 10:34:55 PM The "test" button you speak of is attached to the optics that is part of a whole coin comparitor/optiocs assembly. If it is just loose and there's no bracket to install the comparitor and the optics, you are missing that.
Title: Re: S+ Slant Top - Help with Coin Comparitor Post by: marcun on September 19, 2012, 11:37:03 AM Here are some pics. I was able to get the comparitor installed with the optic assembly and the coins seem to travel properly from the coin head to the hopper. I ordered the pigtail for the comparitor and i see where it attaches to the unit but i'm not sure where it attaches to the slot machine. I've also attached a picture where a DBV once resided. It appears to have a power supply.
|