|
Title: Universal Cactus Pete Horseshu Arm hanging up Post by: tonyd on September 14, 2012, 10:14:06 PM Hello. I'm new to group. I have a Universal slot that when I pull the 1-arm bandit down it sticks and then I have to move it laterally a number of times :279-to get it to release. Any help tips on how to get this arm to flow smoothly and back into its original position. Thank you all for your time and help.
Title: Re: Universal Cactus Pete Horseshu Arm hanging up Post by: uniman on September 15, 2012, 03:21:40 AM Been a long time since I've seen this problem. But I remember it's a lubrication problem.
Grease the rectuglar rod below the large spring and hit the inside center area with a little WD40. Title: Re: Universal Cactus Pete Horseshu Arm hanging up Post by: tonyd on September 17, 2012, 08:22:44 PM Thank you very much it worked perfectly. I used Tri-Flow, it's like wd40, but with Teflon. They use it on gym equipment weight stacks so they glide nicely.
Another issue if you don't mind. I just brought home a Williams Dotmation Jackpot Limbo. It's still in my Explorer on its back. the Dot Matrix right side fell down in the back of cabinet when I hit a bump on the road and is still hitched on the left hand side. Nothing looks broken, but is the dot matrix on the right hand side secured by screws or a latch. Should the Dot Matrix be fine? I can plug it in to try to see if it lights up before I take it out tomorrow. Thanks again for your time and help Sir! Tony Dembeck 248-763-2231 cell Title: Re: Universal Cactus Pete Horseshu Arm hanging up Post by: uniman on September 17, 2012, 10:06:51 PM I know nothing about WMS dotmations, you need to post this question in the WMS section.
Glad to hear the handle is now working on your Universal! :89- Title: Re: Universal Cactus Pete Horseshu Arm hanging up Post by: tonyd on September 18, 2012, 11:24:52 AM Thx Again.
|