Title: Bally "Cash Wheel" W/Progressive problem Post by: lindam1 on September 16, 2012, 06:14:32 PM I've been working to get the link to the progressive to work. I no longer get a C1 or C2 error, but now this (see pic below) any ideas ??
Lindsay Title: Re: Bally "Cash Wheel" W/Progressive problem Post by: slotsteve on September 16, 2012, 09:08:47 PM when you get it going you can make a short trip here and setup those 1/4 millions :208-
Title: Re: Bally "Cash Wheel" W/Progressive problem Post by: lindam1 on September 16, 2012, 10:40:36 PM Thanks Steve you're a heap of help
Lindsay Title: Re: Bally "Cash Wheel" W/Progressive problem Post by: lindam1 on September 18, 2012, 11:02:55 PM Bump
Title: Re: Bally "Cash Wheel" W/Progressive problem Post by: FORDSBS on September 18, 2012, 11:18:50 PM Did you try to reprogram it?
Title: Re: Bally "Cash Wheel" W/Progressive problem Post by: FORDSBS on September 18, 2012, 11:26:46 PM lindam1
:172- Title: Re: Bally "Cash Wheel" W/Progressive problem Post by: stormrider on September 19, 2012, 12:53:44 AM I've been working to get the link to the progressive to work. I no longer get a C1 or C2 error, but now this (see pic below) any ideas ?? Lindsay Lindsay, I assume we are talking about a chamII + here anyway I can tell you a little trick that will help you and any other member that might run across this problem with the # on the display being backwards,upside down or with the $ sign on the wrong side. The trick is go into psp Choose #3 Symbols and Currency Setup Then hit F6 until it reads 10,000,000.00(if it already reads this hit F6 until it comes up again) now hit F1 to send it to the display. Now hit F10 go back into #1 Jackpot programming (hope you know this part) set the correct values for your machine and the jackpot amount you wish. I have run across this many times and this always works. I don't know how good you are at programming these as you also have to setup the Bally machine 11d menu as well as using the psp program. Not to mention the correct cable from the Mikohn to the machine and the jackpot relay installed Which you should already have installed in the cash wheel anyway. But first things first get the display showing correctly ,the jackpot amount you want ...using psp. Then we can move on to machine settings, if you need help in that area. Good luck and post back...... Tim Oh and make sure the battery on the cham board is close to 3v Title: Re: Bally "Cash Wheel" W/Progressive problem Post by: lindam1 on September 19, 2012, 08:58:58 AM Storm,
thanks for the tips, will post after checking Title: Re: Bally "Cash Wheel" W/Progressive problem Post by: FORDSBS on September 19, 2012, 12:21:38 PM I agree with Tim, try that first
Title: Re: Bally "Cash Wheel" W/Progressive problem Post by: lindam1 on September 28, 2012, 10:29:30 PM Storm,
Thanks for the info, I got 1 working perfect and the progressive on another working, but now I guess I've got issues with the top box bonus controller board. The bonus wheel goes to 50 on boot up and then starts spinning again and never stops. The machine plays fine until I hit a spin and then gets an 88 error. Title: Re: Bally "Cash Wheel" W/Progressive problem Post by: stormrider on September 29, 2012, 12:20:21 AM Storm, Thanks for the info, I got 1 working perfect and the progressive on another working, but now I guess I've got issues with the top box bonus controller board. The bonus wheel goes to 50 on boot up and then starts spinning again and never stops. The machine plays fine until I hit a spin and then gets an 88 error. Glad I could help with the progressive problem. Sorry I don't own a cash wheel game so I can't help with the bonus wheel problem but I'm sure another fine member here will chime in and help. Tim |