|
Title: S2000 Netplex Down New Question Post by: sbsgroup on September 17, 2012, 10:08:21 AM I have a machine that was running fine yesterday turned it on and got the netplex down, checked the voltages on the batteries they were fine. If i turn the power off and back on many times it will clear and run just fine. The ones in the past have either worked or not worked. This is the first for me that can be cleared(sometimes) by turning the machine off and on. Any ideas what might cause this? Thanks
Title: Re: S2000 Netplex Down New Question Post by: rjpohl on September 17, 2012, 10:30:00 AM I would check to make sure the power supply behind the reels is seated tightly. I have had similar problems and it's usually the power supply is loose or going bad. You might also want to do a search, there have been many psot about this problem.
Title: Re: S2000 Netplex Down New Question Post by: sbsgroup on September 17, 2012, 11:46:07 AM Thanks I will continue checking, will change power supply.
|