|
Title: BALLY E-SERIES - 71 CODE Post by: FOXSSLOTS1 on September 17, 2012, 09:13:11 PM A 71 code on E-series machines IS NOT NOT NOT and error!!!!!! 71 000 and 50 000 indicate door was opened - one code is a NJ code the other is everywhere else. I know the manual says 71 is reel error BUT IT IS NOT. Hope this stops everyone from moving reels and IO boards etc.
The usual problem with E-series is the DOOR SWITCHes and REEL MECH lubrication!!!! If you have a light tower on your machine - when the white light is on - the door is open - so if you lock and close your door and the light stays on - the machine will TILT with a 41 - check the door switches. When you get 41 42 43 errors - always check that the reel lock levers activated by the coils are not gummed up - if the reels don't stop properly you get the errors. do the 5 test - this shows if the reels are reading - all 0000 and you have problems - and you will TILT. hope this HELPS and stops all of the hair pulling - and fruitless checking for this 71. |