|
Title: bally VPOKB3 24vt fail,coin out jam,overpay and it won't reset Post by: rebel1 on September 20, 2012, 07:50:14 PM 1992 cajun poker machine has errors main door closed,24vt fail,coin out jam call attendant,overpay. This unit will not reset. Not sure what to do, I have turned the reset key and nothing happens. the hopper is cleared of any jams. put a coin in and it goes back to the pan. Coin caparator led is not lit. HELP!
Title: Re: bally VPOKB3 24vt fail,coin out jam,overpay and it won't reset Post by: rjpohl on September 20, 2012, 08:01:05 PM 1. "main door closed" means the door is closed, this is not an error.
2. "24vt fail" not sure what this is! 3. "coin out jam" check the hopper and make sure there are not coins stuck/jammed where the coins exit the hopper/optics 4. "overpay" I believes this means the hopper over paid a coin. Make sure the optics are clean, no dust balls. to clear error you normally have to opern and close door a few times. I'm not real familar with the bally you're working on but I hope this helps you. Bob Title: Re: bally VPOKB3 24vt fail,coin out jam,overpay and it won't reset Post by: proten on September 20, 2012, 08:23:34 PM If you post pictures it will help make sure we give you the right info.
Post pictures of the front of the machine and one with the door open to start. But at this point i think the power supply is going out. The reset button on the video poker like the one I have is on the front of the MPU tray. :211- :211- :211- Title: Re: bally VPOKB3 24vt fail,coin out jam,overpay and it won't reset Post by: rebel1 on September 20, 2012, 09:00:24 PM posted thanks
Title: Re: bally VPOKB3 24vt fail,coin out jam,overpay and it won't reset Post by: rjpohl on September 20, 2012, 09:05:37 PM Again, I don't have much experience with these machines, but the 24vt fail may mean the power supply is bad. No 24 volt output.
Title: Re: bally VPOKB3 24vt fail,coin out jam,overpay and it won't reset Post by: rebel1 on September 27, 2012, 11:58:36 AM still need help! anyone out there? The coin capairitor looks like it has no power as the led is not lit.
Title: Re: bally VPOKB3 24vt fail,coin out jam,overpay and it won't reset Post by: proten on September 27, 2012, 12:23:25 PM The CC won't power up with the door open.
Did you find out why you have the "24 vt Fail" error? Post a picture door open and hopper removed. Title: Re: bally VPOKB3 24vt fail,coin out jam,overpay and it won't reset Post by: rebel1 on September 27, 2012, 03:03:44 PM Hpoe this helps
Title: Re: bally VPOKB3 24vt fail,coin out jam,overpay and it won't reset Post by: proten on September 29, 2012, 09:13:47 PM Have you tried pushing the rest button on the front of the CPU?
I would look behind the on/off switch for the P/S. Title: Re: bally VPOKB3 24vt fail,coin out jam,overpay and it won't reset Post by: rebel1 on September 29, 2012, 11:59:10 PM It has a key to open the cpu or pull it out. I have hit two reset button on the front of the cpu with no luck.
Title: Re: bally VPOKB3 24vt fail,coin out jam,overpay and it won't reset Post by: rebel1 on September 30, 2012, 12:00:28 AM And i do not have that key!
Title: Re: bally VPOKB3 24vt fail,coin out jam,overpay and it won't reset Post by: proten on September 30, 2012, 02:10:07 AM It looks like you will need to get the CPU open.
From what I can see , it looks like the P/S is on the right of the CPU. Title: Re: bally VPOKB3 24vt fail,coin out jam,overpay and it won't reset Post by: rebel1 on September 30, 2012, 11:30:10 AM sorry, but what is the P/S? Power Supply? To the right there is two reset type cicut overloads. Any advice on openeing the cam lock without butchering the cabinet?
Title: Re: bally VPOKB3 24vt fail,coin out jam,overpay and it won't reset Post by: proten on September 30, 2012, 01:26:13 PM Yes, P/S is short for power supply.
The only way to open the lock is to drill out the center and remove the pins and turn the lock. The lock is made of brass and shouldn't be too hard to drill. Title: Re: bally VPOKB3 24vt fail,coin out jam,overpay and it won't reset Post by: rebel1 on September 30, 2012, 10:26:10 PM will do keep you posted, BTW what do I do once its open?
Title: Re: bally VPOKB3 24vt fail,coin out jam,overpay and it won't reset Post by: proten on October 01, 2012, 12:48:06 AM You will pull out the CPU board on the tray and post a picture of the
board and what is in behind the switch/breaker area. Title: Re: bally VPOKB3 24vt fail,coin out jam,overpay and it won't reset Post by: rebel1 on October 01, 2012, 01:41:48 AM I drilled the lock and removed the cpu. There is a microswitch that senses the cpu when it is slid in place. I unplugged the cpu and removed it, reinstalled it , installed the hopper, turned on the power and wala! blue screen with prompts! Filled the hopper and now functioning just fine. Thanks for your help and support.
Title: Re: bally VPOKB3 24vt fail,coin out jam,overpay and it won't reset Post by: proten on October 01, 2012, 02:21:48 AM :105- glad you got it going. :3- :3- :3-
Title: Re: bally VPOKB3 24vt fail,coin out jam,overpay and it won't reset Post by: rebel1 on October 01, 2012, 11:51:26 AM now i can change my avatar!
|