New Life Games Tech Forums

Hello I'm new to the forum.  I'm up in Michigan outside Detroit.  I'm looking for a JackPot Party for my wife's birthday Oct 28th.  I have a Jackpot Limbo that I would be willing to do sell or trade.  If anyone knows of anyone in Michigan that's looking for a Limbo and has a Jackpot party, please reach out to me.  Thanks to all. 

You could keep the machine and buy a Jackpot Party Glass kit.
What size machine do you have? 9" 16" or a round top?
Then place an ad in the WTB section

It's a 16" .  I thought I read somewhere about the kits. Is it very costly? 

16 inch top kit should be around $100.00 or less
You will need top award glass, belly glass, reel strips and game software for the CPU and the dotmation top box.
May also need a clear chip to set the denomination back up

Definitely need the denom clear chip to change the game.  That is if you have a 25 cent game, then you need a 25 cent clear chip.  As with any game change, make sure there are no credits on the machine when you start!  I actually have Limbo and Party set up side by side right now.  The changeover entails removing and replacing either 4 or 5 main board eproms and 3 dotmation eproms in the top box.  You also have to check a couple of jumpers to make sure they are set to the right sound and jurisdiction.  Not very hard and several people here could walk you thru it.  I have been around slots now for a whopping 9 months and have changed out several games so it must be pretty easy!  Sometimes its a lot of trial and error but I get it sooner or later.  The reel glass wasnt mentioned in the kit.  Luckily they are the same 5 line reel glass in this case but they do have 1 different sticker on them each explaining how to get into the bonus round.  Not a big deal overall but there is that slight difference.  Wish I had a kit to sell you.  You may want to hit up http://www.laslots.com/models.php?model=40S5 (http://www.laslots.com/models.php?model=40S5) as they have been parting out dotmations recently.  Good luck!