|
Title: WMS 550 Backplane Pinout Post by: dragster73 on September 21, 2012, 08:54:38 PM I'm trying to hook my Tsetse Fly board from a BB1 to the 550 backplane to be used with CPU-NXT board. I know i need to move three wires. I am told these three wire will need to be connected to the plug on the backplane labeled "topbox" I am in need of which pins go where. I believe they are Transmit,Receive and Ground.
Can anyone point me in the direction of this pinout? Title: Re: WMS 550 Backplane Pinout Post by: hdm72222 on September 11, 2013, 07:10:18 PM Did you finally find out ? I need where to catch the pulse of coin to connect to a Mikhon controller ? Could you help me ? Thanks friend. Title: Re: WMS 550 Backplane Pinout Post by: dragster73 on September 11, 2013, 07:46:32 PM Yes i figured out what needed however i do not have the information you are looking for.
Title: Re: WMS 550 Backplane Pinout Post by: hdm72222 on September 12, 2013, 10:09:48 AM Thanks a lot anyway.
Let us leave the question open just in case someone knows it. Thanks agaiin. Title: Re: WMS 550 Backplane Pinout Post by: hdm72222 on September 14, 2013, 10:15:19 PM Hi
My frinds. I would to find help concerning to every pins of J18 of WMS backplane board P/N 5779-002175-01 video backplane board.- I would like to know what pins are used to catch the coin-in signal to hook to a Mikhon Controller CON2 . Thanks everybody. |