|
Title: Kortek TFT LCD Monitors Post by: DNARGEL55 on September 24, 2012, 11:48:31 AM Model KTL201MD-02 top half of front screen is dim. Any ideas. I have never taken a multi layer screen apart. Could it be the inverter, ccfl or m/d pcb. Any help would a blessing.
Title: Re: Kortek TFT LCD Monitors Post by: Mirage_Chaser on September 24, 2012, 12:46:38 PM Probably the ccfl, could be the inverter but if it is both are usually dark.
The most difficult thing is to get the new ccfl bulb in without breaking it. I have taken to just putting in a strip of led's in so I don't have to deal with it again. But you can get a replacement and cut the boot and just use a dab of hot glue to keep it in and insulate it. Title: Re: Kortek TFT LCD Monitors Post by: Crowsen on December 29, 2012, 06:12:28 PM Not good. I repair monitors all day. This is one of the biggest pain in the asses. There are only a hand full of Companies that are even certified to work on these. I believe propriitory rights of only IGT sales. Anyway MON_LCD,ASSY 20'',MLD,USB-TS,KORTEK $2800.00 from IGT. I think Casino Tech used to repair them,probably not now. Here's a little trick that worked for me. Press auto adjust,does the top or bottom half of your screen switch brightness? If so carefully open the casing. Your 3 fans and your Maple A/D board should be exposed now. LOOK around and find the power cable should have 3 or 4 so wires. Your Molex plug should be burnt. Disconnect it, and again carefully take a small flat head screwdriver and start scraping the black oxidized pins. once pins are shinny connect molex and reassemble.
Title: Re: Kortek TFT LCD Monitors Post by: Plowboy 77 on May 09, 2013, 10:48:22 AM Has anyone here figured this one out yet? I have one now I'm working on. It would be nice if I had another to compare with but....
Thanks. |