|
Title: Mikohn Super controller display (J5, J6) pinout Post by: Mirage_Chaser on September 26, 2012, 02:14:00 PM I want to set up a 3 level poker progressive (Royal, Straight flush, 4 of a kind) and I am unsure how to connect the displays. :279- Does anyone have the pinouts on the display ports? And I assume it will be one signal to each display with a common ground? :99-
And in case it was not clear the is a super controller. Title: Re: Mikohn Super controller display (J5, J6) pinout Post by: Mirage_Chaser on September 26, 2012, 04:32:08 PM It is for some IGT games but I don't think that matters
Title: Re: Mikohn Super controller display (J5, J6) pinout Post by: Mirage_Chaser on September 27, 2012, 11:36:55 AM Bump with the hope someone can help....
Title: Re: Mikohn Super controller display (J5, J6) pinout Post by: McCackie on November 22, 2012, 08:59:24 PM The pins from the front of the CON2 for J5 / 6 appear to number right to left (inspect board). Pins 1 and 6 are grounds, pins 2 and 3 are receive and are unused for most applications, pins 4 and 5 are the CON2 transmit. Connect them to 4 and 5 on the display 4-4, 5-5, in a practical sense just connect a 2 pin Molex type plug (0.187"), if it don't work reverse the pins (turn it 180 deg).
Title: Re: Mikohn Super controller display (J5, J6) pinout Post by: 4 Deuces on November 23, 2012, 12:09:46 PM I want to set up a 3 level poker progressive (Royal, Straight flush, 4 of a kind) and I am unsure how to connect the displays. :279- Does anyone have the pinouts on the display ports? And I assume it will be one signal to each display with a common ground? :99- And in case it was not clear the is a super controller. I noticed you have posts later in October. Not sure if you solved this one. You can get a complete manual for free at Rudy's Deals that will show all the pinouts and how to connect. http://rudysdeals.com/index.php?route=product/product&path=44&product_id=622 (http://rudysdeals.com/index.php?route=product/product&path=44&product_id=622) :Dave :88- Title: Re: Mikohn Super controller display (J5, J6) pinout Post by: McCackie on November 24, 2012, 10:00:10 PM Pin outs, Con2 on page 39.
|