|
Title: Upright AVP Video has Printer tilt & door open Post by: Miggidy on September 27, 2012, 03:03:20 AM Had a Gen 2 Universal I had to replace for partial prints.
Powered game down and replaced printer with new one. Upon powering back up, these tilts came up. 1. Device off line 2. Printer tilt 3. Printer door open Put this new printer in the game next to it and the new printer came up fine. The known good working printer in the game next to this one I put in the problem child AVP game Same tilts as listed above Title: Re: Upright AVP Video has Printer tilt & door open Post by: leapyearguy on September 27, 2012, 03:10:05 AM did you try a different usb port on the back plane?
Title: Re: Upright AVP Video has Printer tilt & door open Post by: michael44michael on September 27, 2012, 03:13:53 AM Yes, there was 2 ports open on the back plane so I just swapped the printer, and bill validator and whatever plug the other device went to
Title: Re: Upright AVP Video has Printer tilt & door open Post by: leapyearguy on September 27, 2012, 03:16:05 AM did you change just the printer or the chassis as well?
Title: Re: Upright AVP Video has Printer tilt & door open Post by: michael44michael on October 03, 2012, 12:46:23 AM Solution was to put yet another brand new printer in which finally solved the issue as strange as that may sound.
Thanks for the advice though Title: Re: Upright AVP Video has Printer tilt & door open Post by: PWRSTROKE on October 03, 2012, 12:56:04 AM Not strange at all.
Solution was to put yet another brand new printer in which finally solved the issue as strange as that may sound. Thanks for the advice though |