|
Title: IGT S - no display Post by: FOXSSLOTS1 on February 19, 2009, 08:36:44 PM I have a friend who has an S (not S+) - had a board problem - changed the battery - when he restarted - reels would spin backwards - and no DISPLAY - sent him a replacement board along with the display board. Reels spin properly - but the DISPLAY is still dead. He says he has check the 4/5 wires from the display back to the CPU board - and everything seems to have continuity. (has tried 3/4 display boards) all same result.
Title: Re: IGT S - no display Post by: asgard on February 20, 2009, 12:05:43 AM Did he check the pins in the sockets on the 'S' circuit board to see if any of them are bent ? The first time I changed out a 'S' circuit board I had a similar experience and that was the problem. You have to be a lot more gentle when changing the 'S' circuit board when compared to the 'S+'.
Title: Re: IGT S - no display Post by: Jim on February 20, 2009, 02:11:10 AM Barry did the machine work ok ? Here are the pinouts from the display board: Pin 4 +vb to J4 pin 12
Pin 5 B gnd to pin 8 Pin 1 ddo to pin 26 J4 Pin 2 dclk to Pin30 J4 Pin 3 stb 1 to pin 28 J4 these also are paralleled up to the top box connector, maybe something up there. Jim Title: Re: IGT S - no display Post by: FOXSSLOTS1 on February 20, 2009, 09:11:27 AM thanks jim - passed that info along to my friend.
these also are paralleled up to the top box connector, maybe something up there. Jim [/quote] |