|
Title: How to fix problem with cash box Post by: thaodow on October 06, 2012, 06:28:42 AM This is what happened, I took out the t340 mother board one day in my machine and later on put it back together. Now that it is back together everything is working but one thing, the inside of the cash box works the light is on however the light is not blink like it should and it wont accept the money. Does any one know how to fix this? Thanks
Title: Re: How to fix problem with cash box Post by: knagl on October 08, 2012, 01:40:25 AM Hi, welcome to the site.
I have no idea what a t340 motherboard is, or what kind of machine you're working with. What make and model of machine are you working on? If you're not sure, please post a picture or two of the machine in question so we can better help you. Title: Re: How to fix problem with cash box Post by: Crowsen on December 29, 2012, 06:43:43 PM Without a picture or machine type this is hard to answer. I would try taking your cash box out and reinserting it. Wether it is a side mount DBV or a any downstacking unit. It could be your stacker door switch or just not seated properly. Let us know the progress if any.
Title: Re: How to fix problem with cash box Post by: Venang on May 10, 2013, 03:28:50 AM I have the same problem with my POG 580F. The green light on it flashes normal but after a few seconds it blinks really fast but not as bright as it should. It sometimes takes money and sometimes it doesn't. It also randomly alerts the bill acceptor error and sounds the alarm then I would always have to go into error stats to clear it but the problem comes back at random times. If anyone know how to fix this I will be very thankful. Bill acceptor model : Apex 5400 dc3 USA
|