|
Title: Williams 550 printer Bypass Post by: anthony860 on October 11, 2012, 07:16:58 PM How can I bypass a printer with out re programing eprom?
Title: Re: Williams 550 printer Bypass Post by: CrazySAS on October 27, 2012, 05:51:48 AM Please specify the problem or need
Title: Re: Williams 550 printer Bypass Post by: anthony860 on October 27, 2012, 09:15:38 PM Would like to make 550 into free play.
Credit switch/collect switch? or flat free play free collect Title: Re: Williams 550 printer Bypass Post by: CrazySAS on October 28, 2012, 04:56:05 AM this option is disabled is not allowed
Title: Re: Williams 550 printer Bypass Post by: anthony860 on October 29, 2012, 11:02:02 AM Can you use a jumper/loop?
Trick board into thinking it is getting a response from BA? Same with printer pulse? Have "by passed " many printers, making board think the Printer received the signal. Looping pulse back at board. Looking to find someone who has done with this board. Signal on the board will remain in normal mode at the board level. Running operations not affected. Only tricking board with A jumper. Title: Re: Williams 550 printer Bypass Post by: lizzo54 on November 04, 2012, 08:48:56 PM Not sure if this is posdible. I have a couple 550s and never heard or read of this. As you may or maynot know the 550 uses a different chip for printer vs hopper. Id say your best option would be to set the payout to the lowest possible(1 coin) then handpay after that. I dont think you can set it to hand pay the entire amount.
As far as free play, i think your only option is to set it to the lowest denom (1c) if possible to get the most bang for the buck. |