|
Title: IGT s2000 CDS progressive light meter = Proview IV display panel verion 3.2 Post by: Cha-ChingDoug70 on October 12, 2012, 03:22:38 AM What do I need to get the meter to work OR just run numbers.
1. I have, Keychip Config I, Keychip config II and progressive in the menu. 2. Do I need wire harness? , A controller box? 3. All I want is to light up some number/s and show the meter running. Too much brain surgery to additionally connect "1","2" to the slot machine? Thanks Folks for any help. Title: Re: igt S2000, 5 REEL= BILL VALIDATION STACK ERROR, open dood M Post by: cowboygames on October 12, 2012, 09:11:46 AM You need to reseat the cashbox in the bill validator and make sure the release lever for it returns to the full upright position
Title: Re: igt S2000, 5 REEL= BILL VALIDATION STACK ERROR, open dood M Post by: Cha-ChingDoug70 on October 15, 2012, 03:29:15 AM You need to reseat the cashbox in the bill validator and make sure the release lever for it returns to the full upright position Thanks, Cash box reseted, lever all the way up, slot w/o key was reset, and it worked for awhile. Now I'm getting it again!!! May ask for more advice if seller can't help me. Title: Re: igt S2000, 5 REEL= BILL VALIDATION STACK ERROR, open dood M Post by: Neonkiss on October 15, 2012, 06:46:17 PM If you don't have a lock on the cash box door, it may be ajar.
Use tape to keep it closed or install a lock. Title: Re: igt S2000, 5 REEL= BILL VALIDATION STACK ERROR, open dood M Post by: Cha-ChingDoug70 on October 21, 2012, 07:33:11 PM Thanks, A combination of: hit door gently, adjust hinge, key reset, all, got me going again. Many thanks. Doug
|