|
Title: Bally e 2000 Post by: chiptaker on October 22, 2012, 07:39:55 PM Error code 6 or 1.6
Title: Re: Bally e 2000 Post by: tkrozleski on October 23, 2012, 07:56:10 PM Well I'll try and get something started here for ya.
No expert here by any means. I'm just putting out some ideas of my past expierence with my E1000 & E2000. Could be a power problem? Bad connections on MPU or power supply? Battery on the MPU? The power supply? Maybe a fuse holder is failing internally? Title: Re: Bally e 2000 Post by: tucsondirect on October 30, 2012, 07:19:12 AM Error code 6 or 1.6 Do you have the service manual for the e-series machines? Check there if you doTitle: Re: Bally e 2000 Post by: JimMay3 on November 01, 2012, 08:19:00 PM Mem test fail, check all plugs and chips, make sure they are seated... Swap a cards with a know good, if you have...
I've had random codes, like 9 before, and just pulling the plugs off and reseating them seems to cleanup and possible light corrosion on the contacts that might cause intermittent codes/failures. Power supply plug, slide it on and off a few times, seems to clear some strange problems. |