|
Title: Futurlogic Firmware Post by: beko on October 23, 2012, 04:06:38 PM Hi guys.
Wondering where to purchase Futurelogic PSA-66ST2 firmware for WMS slots I believe it is GNUSA7510. I have THE FLI software and the schematics to make the connector, but dont know where to get the printer firmware. I have spoken to JCM previously regarding firmware (for the BV) and they have told me to deal with AG&E. Problem is they want proof of due dilligence and that we are a liscensed legal casino. I am not even in the USA so I dont see how those laws can apply over here. I am trying to upgrade our Ithaka 850's as we are getting a lot of RS232 comm board failures and can only find replacements at $90 a pop. I have the replacement IC's but not the tools, hands or eyes to do the repair. Any help as always will be appreciated David Harwood Title: Re: Futurlogic Firmware Post by: TZtech on October 23, 2012, 08:12:44 PM :204-
Title: Re: Futurlogic Firmware Post by: idesign on October 23, 2012, 08:59:18 PM Isn't there a PLCC firmware chip in the 850 that can be removed and flashed in a burner with the proper adapter? Anybody know the WMS firmware number for the 850? I have a chip that's supposed to be WMS firmware labelled PP8523 Rev. 37 but it does not print enhanced graphic letters, only generic.
Title: Re: Futurlogic Firmware Post by: beko on October 24, 2012, 01:50:21 PM There are quite a few revision chips available for the 850 that we use. I dont believe there is a way to interact with the fonts as it takes the info from the host machine itself.
Title: Re: Futurlogic Firmware Post by: CrazySAS on October 27, 2012, 04:49:38 AM Hi guys. Wondering where to purchase Futurelogic PSA-66ST2 firmware for WMS slots I believe it is GNUSA7510. I have THE FLI software and the schematics to make the connector, but dont know where to get the printer firmware. I have spoken to JCM previously regarding firmware (for the BV) and they have told me to deal with AG&E. Problem is they want proof of due dilligence and that we are a liscensed legal casino. I am not even in the USA so I dont see how those laws can apply over here. I am trying to upgrade our Ithaka 850's as we are getting a lot of RS232 comm board failures and can only find replacements at $90 a pop. I have the replacement IC's but not the tools, hands or eyes to do the repair. Any help as always will be appreciated David Harwood Title: Re: Futurlogic Firmware Post by: CrazySAS on October 27, 2012, 04:53:30 AM David H
I specialize in WMS, from what I understand you need the firmware of future logic printer, please contact us for help Also need help with 850 ithaca please describe the problem you are going regards |