New Life Games Tech Forums

**Reel Slots** Gaming Machines => Bally Reel Games. => Topic started by: JimMay3 on October 28, 2012, 05:33:05 AM



Title: Bally Series E 2000
Post by: JimMay3 on October 28, 2012, 05:33:05 AM
Does anyone know how to reset the coin counters that are displayed when the lower key switch is cycled on an E series machine

Also, can't figure out what the top switch does?

Trying to find out what the wire colors ar on the door lock switch (one on the lock cam), I believe my are hooked up wrong.  White door light does not seem to be operating properly.

does anyone have a code chart, apparently there a 2 sets of codes, looking for a conversion chart, example 50 and 70 are the same for the door.


Title: Re: Bally Series E 2000
Post by: tkrozleski on October 28, 2012, 09:05:18 PM
50 is - door was opened

70 is - handle was pulled and no coins played

push the reset on the hopper board?

The white light bulb been checked to see if it is burned out?


Title: Re: Bally Series E 2000
Post by: tkrozleski on October 28, 2012, 09:20:23 PM
http://newlifegames.net/nlg/index.php?topic=18116.0 (http://newlifegames.net/nlg/index.php?topic=18116.0)

Might be able to get a manual at this link


Title: Bally E-Series 1000 - 2000 Machines (Resetting Audit/Coin Counters)
Post by: JimMay3 on October 29, 2012, 12:58:11 AM
Still trying to figure out how to reset the coin counters that are displayed when the lower key switch is cycled on an E series machines.

When the bottom key on the side of the cabinet is turned (door closed), it shows how many coins were collected, awarded and in machine, but can not figure our how to reset all these audit counters, any ideas...

I can not figure out what the top key does on the side of the cabinet, from what I have read, it should reset the jackpot alarm when the machine can not payout due to a big win or not enough in the hopper to pay for the entire win.  I'm thinking the circuit may be bad or it needs some other switch combo to clear it (door open or change button pressed at the same time).

Should be the same for the Bally E-Series, E Series, Series E, Series-E 1000 - 2000 Machines.


Title: Re: Bally Series E 2000
Post by: tucsondirect on October 30, 2012, 07:09:14 AM
i was able to do it once on my e-1000 but i have no idea how!  :103- :103-


Title: Re: Bally Series E 2000
Post by: JimMay3 on October 30, 2012, 03:29:08 PM
good to hear it is possible...  I went through and tried every combination one more time, still no luck...  Anyone else??? :60-


Title: Bally Series E 2000 (Bookeeping Meters Coin Counter)
Post by: JimMay3 on November 01, 2012, 08:25:44 PM
Still looking for any info on how to reset the coins and audit counters (bookeeping meters features) to track money in/out.

Attahched is the best I can find, nothing about reseting...


Title: Re: Bally Series E 2000
Post by: dhellis on November 10, 2012, 12:58:36 AM
good to hear it is possible...  I went through and tried every combination one more time, still no luck...  Anyone else??? :60-

Have you tried removing the Ram chips? Once the rams lose power they will lose any information they had previously contained.
I think that there is also a clear chip for these machines. Barry at Foxslots may have this.