New Life Games Tech Forums

**Reel Slots** Gaming Machines => Bally Reel Games. => Topic started by: giancarl27 on November 02, 2012, 01:08:59 PM



Title: Bally S6000 BVA
Post by: giancarl27 on November 02, 2012, 01:08:59 PM
Dear All,

I would like to ask your assistance to my bally S-6000 BVA that only accept in face up and I want it to accept bills in 4 ways or anyways. Is it supported by machine setup or from BVA program? Any Ideas  are very much appreciated.


Thank you.



Title: Re: Bally S6000 BVA
Post by: paul on November 03, 2012, 12:53:31 AM
what kind of bill validator do you have an  WBA11 or a   13


Title: Re: Bally S6000 BVA
Post by: giancarl27 on November 03, 2012, 01:42:48 AM
Thanks for the reply. I have WBA -13


Title: Re: Bally S6000 BVA
Post by: CVslots on November 03, 2012, 01:56:32 AM
WBA-13 should be accepting all 4 ways...have you checked labels on both the body/transport of the WBA and the head? There is typically 2 labels/stickers, one on each...a WBA-11 head will not accept bills 4 ways, although it CAN be used on a WBA-13 transport. So, If you have a WBA-13 transport with a WBA-11 head, it will ONLY accept bills 2 ways...


Title: Re: Bally S6000 BVA
Post by: giancarl27 on November 03, 2012, 07:38:06 PM
Yes, I have WBA-13 transport but with WBA-23 bill head but I tried to test and Match the same WBA-23 transport and bill head but still accepting face up only. For additional info. I 'm currently using Bally CsB8E9 for Euro currency program.

Thanks for the support.