|
Title: trouble with set chip on a pe+ slant top Post by: jth718 on November 03, 2012, 08:26:40 PM I got a new super board for my slant top I put it int he machine and ran the clear chip pulled it and tried to run the set chip and this is the error I received. I have set chip versions 0038 and 004 I tried to run both and got the same error. anyone have any ideas?
Title: Re: trouble with set chip on a pe+ slant top Post by: jth718 on November 03, 2012, 08:34:01 PM some more pics of the board
Title: Re: trouble with set chip on a pe+ slant top Post by: Foster on November 04, 2012, 08:21:07 AM Did you let the machine boot with just the game and other chips installed between the clear and set chip and clearing any tilts from the clear?
Title: Re: trouble with set chip on a pe+ slant top Post by: jth718 on November 04, 2012, 02:55:04 PM no I didn't try and boot the game in between the clear and set I will try that today when I did try and bot the game I got a white screen
Title: Re: trouble with set chip on a pe+ slant top Post by: knagl on November 04, 2012, 08:33:33 PM when I did try and bot the game I got a white screen Hmm. This whole thing is a little odd. I'd for sure start by making sure you have a working board and/or chipset. You don't need the bill validator to work in order to have a working game, so I'd do as Foster suggested and simply try to get the game running without the bill validator first. On the "white screen" you got, was there any text at all? Does anything happen when you press the self test button? Is this board and/or chipset known to be good? Title: Re: trouble with set chip on a pe+ slant top Post by: CVslots on November 04, 2012, 09:01:42 PM The board was tested and works. :89-
Title: Re: trouble with set chip on a pe+ slant top Post by: jay on November 04, 2012, 09:17:15 PM As noted before - boot the machine with just the game in it.
Go through the menus and set the machine denomination to the desired value. Part of the PE+ checksum process is that the bill validator denomination must match the machine denomination. SO if its not set on the machine then the SETCHIP process won't work. Title: Re: trouble with set chip on a pe+ slant top Post by: jth718 on November 08, 2012, 06:11:45 AM I got my original board that came with my machine working with coins and bills. the board I bought off ebay is still having problems. I ran the cler chip it says eeprom ok clear ok. I pull the board and put the game chip back in and I get a white screen(pic below) not sure if its a bad board or bad game chips,
Title: Re: trouble with set chip on a pe+ slant top Post by: jay on November 08, 2012, 11:11:55 AM This occurs when you don't have a caprom installed.
If this is a superboard and you have a cap vs a capx that may do it as well. Title: Re: trouble with set chip on a pe+ slant top Post by: jth718 on November 08, 2012, 11:41:16 PM is the caprom the chip on top of the data chip? on my superboard it is a large chip with a black cap on top not sure if you can see from the previous pics I posted. on my original board that came with the machine the eeprom does not have a big cap on top of the chip
Title: Re: trouble with set chip on a pe+ slant top Post by: jay on November 09, 2012, 12:18:05 AM The caprom is the small chip with a label above the M?O
Title: Re: trouble with set chip on a pe+ slant top Post by: jth718 on November 16, 2012, 06:15:06 AM turns out it was the game and data chips that were no good. tested the caprom and the r.g.b.x chips and all were good. now I just have to find a new set of multi game chips
|