New Life Games Tech Forums

**Reel Slots** Gaming Machines => IGT S2000 and Vision Games. => Topic started by: bhinkley on November 08, 2012, 10:54:45 PM



Title: clear and key chips for a flash board on s2000
Post by: bhinkley on November 08, 2012, 10:54:45 PM
I need some help here.  I am trying to get a double fire opal s2000 slot machine up and running.  I am getting a display netplex is down error when turning on the machine.  it is an enhanced board on an s2000 with the flash board on it.  I know you need different clear and set chips for these, and I don't have them.  I am wondering which ones I need, and where I may be able to obtain those chips.  The board info is as follows:

Boot chip is RB000003
Base is SB001000
flash board has a sticker on it labeled R0000418

Any help would be greatly appreciated.  Clear procedures would be appreciated as well if they are different than a normal s2000.  Thanks.


Title: Re: clear and key chips for a flash board on s2000
Post by: cowboygames on November 08, 2012, 11:37:39 PM
Might just be your power supply is loose or your green battery is low/bad


Title: Re: clear and key chips for a flash board on s2000
Post by: bhinkley on November 08, 2012, 11:39:59 PM
It's a new green battery and a new and tight known good power supply


Title: Re: clear and key chips for a flash board on s2000
Post by: wireless73 on January 11, 2013, 11:13:04 PM
For that SB I used a clear 224 and key 45.  I dont know where to find the boot chip or flash board on mine so not sure if that matters.


Title: Re: clear and key chips for a flash board on s2000
Post by: coorslight115 on January 12, 2013, 02:17:13 AM
I need some help here.  I am trying to get a double fire opal s2000 slot machine up and running.  I am getting a display netplex is down error when turning on the machine.  it is an enhanced board on an s2000 with the flash board on it.  I know you need different clear and set chips for these, and I don't have them.  I am wondering which ones I need, and where I may be able to obtain those chips.  The board info is as follows:

Boot chip is RB000003
Base is SB001000
flash board has a sticker on it labeled R0000418

Any help would be greatly appreciated.  Clear procedures would be appreciated as well if they are different than a normal s2000.  Thanks.

It requires a RBK0001 CLEAR/KEY combo chip. I have them if you need one, pm me