New Life Games Tech Forums

 :99-   I have a drop in bar model IGT 5 game stainless steel top machine with a bill acceptor, it had 5 games to play,,,I disconnected the battery and when i re soldered it all my stats where jumbled with ! ? /& # mixed with numbers now the screen shows Door open / call attendant/ Cmos Data  when i turn it on  :99-

 here is a pic of the board of my slot machinewhat kind of chips will i need to buy? and which one of the chips would i take out to clear the c-moa data? and reset the game I honestly know very littel about the video games i mostly tinker with the mechanical and Electra mechanical slot machines ,,,

i can still get to a screen that shows a multi game 5 game option with stat options below but that's it any and all help is appreciated :99-

Thanks,



Sincerely


Geena :88-

ps: i have try ed a bunch of the test procedures to reset ,but i think i need reset chips :79- :30- :71-

Update::

I have ordered a different mother board on eBay and a set of PE+ clear and set chips
I guess i may as well put new battery in as well :71-

 I really  don't know witch chip to take out on my board to put the clear and set chip into   :103- ma be the dude will send in strutions with them from eBay :3-

anyway hope to be playing my game soon again,

i am hoping the new board might help with the door open message, i honestly have try ed all i know to get it to go away :72- and it still "Haunts me :89-

i cant seem to find the lower door optics for sale anywhere how would i bypass them temp to test and reset game?

thanks to any and all that might have suggestion's :131-

Geena  :88-
                                                                                      UPDATE !!!!!!!!!!!!!!!!!!
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
OK
i have my drop in poker up and working

this is what i did

i tryed all the test procedures to remove the error coads but no go   , as my door open error i could not get gown i tryed by-passing the top optic and the bottom duel eye one unit optic but the bottome door one dident seem to respond/ work and i dident / could not find a nother set to replace mine

i looked for weeks on how to bypass ,, but no go

i also had jumbeled stats  so i thought i needed to clear ram and re set with chips,, >I DIDENT NEED TO<

long story short, i had had enuff and said to heck with it and i took the top door side optic and twisted the 2 wires together,,
 then the the statinary top door optic and twisted the 2 wires together,

then proceded to find a peace of tinfoil and taped it in front of the lower door duel optic and the door open warning vanished from the screen ! Yay!!!,

OK

then i carefully went Thur the test proceders again

turned power off,,  then back on

pressed small white test butten herd ding after 5-7 seconds terned reset key once and boom my game was back and working plays all 5 games

cycle's properly bill acceptor works good !!!!

================================

now i must find out why my monitor has a all pink wash on it and i will be 100 %

any sugestions on a used monitor location ,, or how to fix mine are apreciated   ;-))

thanks

I have what you need,  PM sent

In order to clear the cmos data error, open the door and press the test button for a few seconds until you hear a beep sound. Then close the door and turn the jackpot key once. This procedure will put your machine to play but then you need a key chip to re-enable your bill acceptor and to set the denomination.

TY a bunch  :88- hopfully i can find the door open problem and try the test again, i think i am going to order the pe plus chips just in case :204-