|
Title: Bally 6000 Progressive Issue ?? Post by: lindam1 on November 11, 2012, 02:11:09 PM I have several 6000's with progressive. I have had no issues setting them up til this one. In the Cham menu under addr, I do not have the "Proto-con2" option. in the disp, I only have the "SA" option, no sa1 pr sa2, just SA, 1,2,3,4,5........ and of course I'm getting a 91NC error. any ideas??
Thanks Lindsay Title: Re: Bally 6000 Progressive Issue ?? Post by: stormrider on November 11, 2012, 03:09:17 PM I have several 6000's with progressive. I have had no issues setting them up til this one. In the Cham menu under addr, I do not have the "Proto-con2" option. in the disp, I only have the "SA" option, no sa1 pr sa2, just SA, 1,2,3,4,5........ and of course I'm getting a 91NC error. any ideas?? Thanks Lindsay If we are speaking about the ChamII + then no option for above SA I would check software ver U19 on the Cham board if its older like v1.41 you won't get those selections. Off the top of my head I can't remember what ver it changed those options you are looking for but I RUN V2.11 91 nc error can be fixed via the bally 11d menu 02 setting choose 4 or 5 depending if your using the 485 cable with it. I don't and choose #5 . Sorry headed out the door to work outside today to much chit to get done while the weather is warm. Have a look in the progressive section here you will find the answers. Tim Title: Re: Bally 6000 Progressive Issue ?? Post by: lindam1 on November 12, 2012, 10:25:44 PM BUMP
Title: Re: Bally 6000 Progressive Issue ?? Post by: a69mopar on November 12, 2012, 10:43:45 PM I have several 6000's with progressive. I have had no issues setting them up til this one. In the Cham menu under addr, I do not have the "Proto-con2" option. in the disp, I only have the "SA" option, no sa1 pr sa2, just SA, 1,2,3,4,5........ and of course I'm getting a 91NC error. any ideas?? Thanks Lindsay If we are speaking about the ChamII + then no option for above SA I would check software ver U19 on the Cham board if its older like v1.41 you won't get those selections. Off the top of my head I can't remember what ver it changed those options you are looking for but I RUN V2.11 91 nc error can be fixed via the bally 11d menu 02 setting choose 4 or 5 depending if your using the 485 cable with it. I don't and choose #5 . Sorry headed out the door to work outside today to much chit to get done while the weather is warm. Have a look in the progressive section here you will find the answers. Tim see above Title: Re: Bally 6000 Progressive Issue ?? Post by: lindam1 on November 12, 2012, 11:11:45 PM The chip ver. is 1.54. I've done a bunch of them and never had the prob.
Title: Re: Bally 6000 Progressive Issue ?? Post by: lindam1 on November 12, 2012, 11:18:34 PM Are newer version chips available or am I SOL?
Title: Re: Bally 6000 Progressive Issue ?? Post by: stormrider on November 12, 2012, 11:59:36 PM The chip ver. is 1.54. I've done a bunch of them and never had the prob. Version V2.05 will give you the Proto-con2 selection you are looking for. What game theme are you setting up here ? that you need this. Are you just setting up a chamII + to the machine ? As far as I know or the version chips I've seen are 1.41,1.54,1.61,2.05,2.11 I use v2.11 and yes they are available The 91nc error depends if you are using the 485 If you are then you must select #4 under option 2 in the bally 6000 menu 11d If not you will get 91nc Tell us a little more on what you are trying to do here. Tim Title: Re: Bally 6000 Progressive Issue ?? Post by: lindam1 on November 13, 2012, 12:11:03 AM The chip ver. is 1.54. I've done a bunch of them and never had the prob. Version V2.05 will give you the Proto-con2 selection you are looking for. What game theme are you setting up here ? that you need this. Are you just setting up a chamII + to the machine ? As far as I know or the version chips I've seen are 1.41,1.54,1.61,2.05,2.11 I use v2.11 and yes they are available The 91nc error depends if you are using the 485 If you are then you must select #4 under option 2 in the bally 6000 menu 11d If not you will get 91nc Tell us a little more on what you are trying to do here. Tim The game is a Blazing 7's 3R 1L w/progressive. It is a stand alone. I've tried 4 & 5 and both give a 91 NC. I've done a bunch of these with no problem, That's why I'm very confused. Any ideas where I might get a newer chip Ver. Title: Re: Bally 6000 Progressive Issue ?? Post by: a69mopar on November 13, 2012, 12:14:44 AM try swapping your main board. Sometimes a bad board won't allow progressive communication.
You should be setting it to SA also. W P.S. Jim at Blueridge should have the chips. Title: Re: Bally 6000 Progressive Issue ?? Post by: lindam1 on November 13, 2012, 12:25:51 AM Thanks Wayne. I sent him a PM
|