|
Title: s6000 trouble Post by: slotsteve on November 12, 2012, 07:33:14 PM have a 6000 here we need to get out 1st thing in morning but coin mech won,t pull out lockout gate and if we jam it open coins go in to hopper no credits , we changed mpu , coin mechs, coin board with eyes on it ,
thanks in advance Title: Re: s6000 trouble Post by: rjpohl on November 12, 2012, 07:38:08 PM First check to make sure the toggle switch on CPU board is up.
Title: Re: s6000 trouble Post by: slotsteve on November 12, 2012, 07:40:41 PM yes its up
Title: Re: s6000 trouble Post by: rjpohl on November 12, 2012, 07:44:34 PM Was this machine working (taking coins) before?
Option 81 needs to be set to 0001 if it has a coin comparator Title: Re: s6000 trouble Post by: slotsteve on November 12, 2012, 08:27:36 PM i,ll try that now. no these games were all bills in tickout games
Title: Re: s6000 trouble Post by: slotsteve on November 12, 2012, 10:18:48 PM still no go changed the mpu coin mech and coin mech board , also did clears i think the trouble is in cabinet but what
Title: Re: s6000 trouble Post by: rjpohl on November 12, 2012, 10:31:01 PM you might want to post a pic of the coin mech (inside of door). Also check to see if the light is lite on the coin in optics, I think it should also be lite on the coin comparator with door open.
Title: Re: s6000 trouble Post by: slotsteve on November 12, 2012, 10:59:45 PM lightis on on lower board below coin mech we tryed at least 5 driffrent coin mech , if i press test button on board under mech it coins up but lockout does not pull in and coins don,t put up credits if i jam lockout out so coins go past eyes which we changed 2 x
Title: Re: s6000 trouble Post by: rjpohl on November 12, 2012, 11:19:24 PM Are you using quarters and do you have coin in optics for small coins?
Title: Re: s6000 trouble Post by: slotsteve on November 12, 2012, 11:25:04 PM tryed both quarters and tokens where dose lockout get its power from ? this game had a ticket unit in it we took it out today but just put coin mechs and coin head on it this after noon
Title: Re: s6000 trouble Post by: rjpohl on November 12, 2012, 11:39:04 PM I was thinking the light should be on on the coin comparator even with door open. Check your wiring harness to be sure no wires are pulled loose. Maybe someone else can chime in on whether light should lite or not.
Title: Re: s6000 trouble Post by: lindam1 on November 12, 2012, 11:45:28 PM Light's on all the time
Title: Re: s6000 trouble Post by: slotsteve on November 12, 2012, 11:56:34 PM none of my coin com lights were on that were the trouble is i hope
Title: Re: s6000 trouble Post by: slotsteve on November 13, 2012, 07:02:38 PM try again today still a no good a few time coins did put up credits then it stopped work on any coins , took out back p-plain it looks good, also tested all the wires from coins parts on door to back plain all tested good
Title: Re: s6000 trouble Post by: rjpohl on November 13, 2012, 07:29:34 PM did you check to make sure you have the right coin in opticsw for the coin size you're using. If you have a dollar size coin in optics it will not see all quarter size coins.
Title: Re: s6000 trouble Post by: slotsteve on November 13, 2012, 09:00:13 PM they were 1/2 dollar size we put in a shim we done that b4 to many dollar games and never had any trouble, i changed small harness on coin mech also, what get me is it did work a few times this morning off and on
Title: Re: s6000 trouble Post by: rjpohl on November 13, 2012, 10:35:47 PM here's section from manual about coin comparator:
69 Coin Acceptor (0000) Coin Mechanisms, Inc. CC-16 0001 IDX X-20™ dual denomination coin acceptance (Default if MC=16) check option 69, make sure you have the right coin comparator selected Title: Re: s6000 trouble Post by: slotsteve on November 13, 2012, 11:04:35 PM that sounds like the best chance i heard so far i,ll check it out on thur heading to w va in morning
again thanks |