New Life Games Tech Forums

I've done a "key" on an R board with success. Now I can not clear any error that comes up. I opened the door "M" error I opened the cash box door "B" Error and remove the B/V and a B/V error. No mater what I do they will not clear.

And you opened & closed the door several times?

Several is an under statement. I put the Clear/key chip back in and did a clear and when it was done I still had the door M error. I had already changed the 2 door sensors BUT they came from a machine I have never booted yet so tomorrow I'm gona try a set from another machine. They can't all be bad.

What game are you working on-B.--May help to know.

I only did one of these myself. I know I screwed up in the sequence once or twice & did it over.. I don't remember exactly how I did it.
If I'd get on one I could figure it out. Maybe someone will chime in who knows for sure. Good luck. If my old mind starts working tomorrow I'll let you know if no one else helps you.

It's a 5 reel Double 777's Red Hot 15 line.

Did you just get the game-new addition or a build?-B.

New add. It had a SAS error so I just Keyed it. It booted fine, but the B/V didn't cycle. I tried a different B/V and thats when the errors poped up that will not clear

Check voltage on the Green battery...needs to be +3.0v.  These sound like stacked errors on the tattle tale chip. 

With more info on this I agree Jim.  The more info the bettor--Should be a good/easy fix--B.

Jim,
I think you hit it. the Batt says 3.6 V it's about 2.7 V

Looks like Jim came thru again. :244- :244-

2.7 is about the boarderline to dead.  Try that and set it up again.  Let us know.  Should work.  --B.  Thanks Jim for the help on his part-B-again-- :89-.