|
Title: Old Barcrest turned into Hook'em Horns machine Post by: MikeCamp on November 25, 2012, 01:17:45 PM Hello all, not sure this is a before and after but a transformation. I bought a old bar crest machine that nobody could get working and removed almost everything from the cabinet and turned it into this Hook'em Horns themed machine based on a 5X game. Here are the before and afters, well this was after I striped alot off the old bar crest machine.
Title: Re: Old Barcrest turned into Hook'em Horns machine Post by: Buzz on November 25, 2012, 03:18:33 PM Mike I have just the thing to plug the extra hole in your play deck, a chrome plate that came off a S 2000 play deck. I still have your address if you want it. Or if you have a S 2000 that you plan on adding a button to make it a Multi denom machine you can use the plate you remove from it.
Title: Re: Old Barcrest turned into Hook'em Horns machine Post by: MikeCamp on November 26, 2012, 06:49:23 PM Thanks Buzz, I have a small square chrome square over it now but it does not fit well. There is a notch on the back that holds up one corner. Not sure which machine it came off of but if I square it up with the other buttons, there is a small screw hole above and below the cover. You may have something different and that would be great.
Mike Title: Re: Old Barcrest turned into Hook'em Horns machine Post by: MikeCamp on November 26, 2012, 06:50:50 PM Here is a little better picture.
Mike Title: Re: Old Barcrest turned into Hook'em Horns machine Post by: Buzz on November 27, 2012, 01:06:08 AM Mike The ones I have are a inch and 5/16 square. Removed from a S 2000 to install a multi denom button. Let me know.
Title: Re: Old Barcrest turned into Hook'em Horns machine Post by: MikeCamp on November 27, 2012, 09:18:38 PM The one on it in that last picture I posted was 1 inch and about 5/16 or so across so same thing you have. I just need to grind that little nub off the back so it will lay down better on a diagonal and cover those two extra holes.
But I do appreciate the offer, Mike Title: Re: Old Barcrest turned into Hook'em Horns machine Post by: OhioGaming on November 27, 2012, 11:00:33 PM Put another spin reel button in.
Wire them together?? Leave it blank?? Oh I know >> put an Ohio State emblem in that spare button. Title: Re: Old Barcrest turned into Hook'em Horns machine Post by: MikeCamp on November 28, 2012, 12:37:46 AM Put another spin reel button in. Wire them together?? Leave it blank?? Oh I know >> put an Ohio State emblem in that spare button. Excellent idea but the Ohio State emblem might clash with the orange :) Title: Re: Old Barcrest turned into Hook'em Horns machine Post by: buzzarama on July 27, 2013, 07:46:50 PM I would have went with a little more crimson and creme, it would probably play better ;)
David |