|
Title: Hooking up ICT bill validator to 360/550 backplane or coin compairitor Post by: tg2051 on March 01, 2009, 05:23:35 AM Has anyone figured out a way to use the generic "pulse" bill validators (such as the A6 ICT) onto a WMS 360/550?? I know there is two way security communications on the BV input to backplane, and I assume the same holds true for the coin drop input into the backplane. We would like to move some games from a 360 slant top to a generic "Cherry Master" video redemption cabinet. Any advice would be greatly appreciated...
also, if this is not possible... does anyone have a list of the supported BV's and the associated serial boards... I will need a few if the idea above is not feasible... so let me know what you recommend and if you have any for sale. Thanks! Title: Re: Hooking up ICT bill validator to 360/550 backplane or coin compairitor Post by: Slotmaster on March 01, 2009, 01:57:11 PM I know someone made a board to convert pulse to Rs232 but can remember who.
I think it might have been http://www.luckysunshine.com/ : updated with the correct website Title: Re: Hooking up ICT bill validator to 360/550 backplane or coin compairitor Post by: tg2051 on March 01, 2009, 05:25:10 PM Thanks a trillion + 1 Slotmaster... you are the master! That solves the last unknown on this project... your a lifesaver :131-
Title: Re: Hooking up ICT bill validator to 360/550 backplane or coin compairitor Post by: jacquelynqc on July 27, 2009, 04:47:10 AM Would you by any chance be able to explain how you did this project. I've seen many WMS games in cherry master cabinets right now but i am still wondering how to convert this myself. Can you help?
Title: Re: Hooking up ICT bill validator to 360/550 backplane or coin compairitor Post by: Slotmaster on July 27, 2009, 11:28:31 AM Would you by any chance be able to explain how you did this project. I've seen many WMS games in cherry master cabinets right now but i am still wondering how to convert this myself. Can you help? I have never done the project so I can't comment beyond knowing that one just moves all the hardware from one cabinet to the next. It's not that popular these days as getting all the parts and or the value of the original cabinet is grater then Charry Master etc. Also the parts are getting harder to get and I would venture to say the 1.5+ platform is getting tired. I still see the NXT as being popular but getting the NXT board is also near impossible. |