New Life Games Tech Forums

**Video Slots** Gaming machines => Aristocrat Video Gaming Machines => Topic started by: Mark1505 on December 19, 2012, 12:40:44 AM



Title: Aristocrat Forture Hunter
Post by: Mark1505 on December 19, 2012, 12:40:44 AM
I  have a Fortune hunter and I think it is a MK5 but I'm not sure. The game will come up if I disconnect the printer but then I get Call attendant  Printer error.
I need to know how to disable the printer. I need a manual if someone has it.
Thanks and Merry Christmas
Mark


Title: Re: Aristocrat Forture Hunter
Post by: Gaming1 on December 19, 2012, 04:26:43 AM
Is thi a nsw game or somewhere else. Or post game number and EPROM position numbers so I can tell


Title: Re: Aristocrat Forture Hunter
Post by: Mark1505 on December 20, 2012, 12:26:18 AM
Here a picture of the board


Title: Re: Aristocrat Forture Hunter
Post by: SS308 on December 20, 2012, 06:12:20 PM
That board is a 540 or Mark4, In AU they never had printers attached to this model, Mark5.2 was the first to use printers here.
I presume you would need to RAM clear it & set up from scratch without the printer option.
There is a reset procedure on this site.


Title: Re: Aristocrat Forture Hunter
Post by: Mark1505 on December 20, 2012, 06:20:23 PM
Where can I find the setup on the sight?


Title: Re: Aristocrat Forture Hunter
Post by: proten on December 20, 2012, 06:39:57 PM
Here is the reset procedures.


Title: Re: Aristocrat Forture Hunter
Post by: Mark1505 on December 22, 2012, 01:12:12 PM
I'm not sure what I'm doing wrong but I can not get into the games setup. The keys on my machine are spring loaded and do not stay in the turn position.
I have tried turning and holding both keys at the same time. I have read the setup sheet and it seams simple. Is there something That I'm missing?
Thanks
Mark