New Life Games Tech Forums

**Reel Slots** Gaming Machines => IGT S2000 and Vision Games. => Topic started by: hotrod777 on December 23, 2012, 02:45:42 AM



Title: Setting name/address on ticket, S2000
Post by: hotrod777 on December 23, 2012, 02:45:42 AM
504-B board, '63 game chips.
I have a Key 31.

I successfully did a ram clear and key for a game swap with denomination change.
The only thing that's left is that I'd like to set the Name and address on the Tito tickets.

I have worked on a GK before and it's right on the screen, but where is this setting in the S2000 menu?

And, I believe this has been covered before, but am I correct in assuming that these machines cannot be set to 're-bet' the last coin amount played by just pressing Spin or pulling the handle?
You HAVE TO press bet1 first, then spin/handle?
(I'm so used to just pressing spin or pulling the handle at the casinos while betting just 1)

Lastly, just for information, the Triple Lucky 7's kit came with a DSV00013.  In my opinion the sounds suck on that SIMM, except for the "triple lucky 7's cartoon voice in attract mode.
I switched back to a 42.


Title: Re: Setting name/address on ticket, S2000
Post by: hotrod777 on December 23, 2012, 02:57:19 AM
Answered 1 of my questions already, I found as post by Foster that say on my '363 game chips I can set Game Play: Spin Repet to get the repeat bets.  Awesome. :131-

So, just need info on setting the Tito ticket info  :103-


Title: Re: Setting name/address on ticket, S2000
Post by: Ron (r273) on December 23, 2012, 11:53:33 AM
Answered 1 of my questions already, I found as post by Foster that say on my '363 game chips I can set Game Play: Spin Repet to get the repeat bets.  Awesome. :131-

So, just need info on setting the Tito ticket info  :103-

To change ticket name:
1. Go to Options
2. 3.1 Machine
3. 3.1.10 Printer
4. 3.1.10.1 Data Entry
5. Can only change one letter, number or symbol at a time by scrolling side to side.

Ron (r273)


Title: Re: Setting name/address on ticket, S2000
Post by: hotrod777 on December 23, 2012, 02:14:55 PM
Thank you Mr 273, it worked perfect.  :131-
I have a member-made menu pdf that was posted here a while back but it stops at 3.1.9, that's why I couldn't find it.

And, in case it might clarify for someone else, the 'spin repeat' works perfect on the spin button only, the handle still stays locked unless bet1 is pressed.  Better then nothing tho.


Title: Re: Setting name/address on ticket, S2000
Post by: cowboygames on December 23, 2012, 03:50:19 PM
I disabled the solenoid on one machine and ran jumper wires from the spin button to the handle switch to get the same effect one time. Works great except the handle never locks


Title: Re: Setting name/address on ticket, S2000
Post by: mwadems on December 20, 2013, 09:41:14 PM
great info!