|
Title: Aristocrat problems Post by: Mark1505 on December 25, 2012, 10:50:44 AM I have two Aristocrat machines. One's made in 94 and the other made in 96. I have the manuals and have read how to clear on older post.
I have two key switches on both machines. They are all spring loaded and return back when you let them go. First questions is this correct or should they stay turned. I can not seem to get into any type of different screen. Turning the key, holding them , pushing any of the button.Has anyone had this problem. Thanks for the help Mark Title: Re: Aristocrat problems Post by: proten on December 25, 2012, 01:20:54 PM You will need the switches to stay turned.
I removed the two key switches and replaced them with plain toggle switches temporally. Then you can go though the setups with out two extra hands. Title: Re: Aristocrat problems Post by: Mark1505 on January 11, 2013, 12:50:33 AM after working on the machine and not getting any where, I found a broken wire to the reset switch.
If I turn the reset switch I can get in the meter screen. I can move through all 3 screens, seems to be working correct. If I hold the switch or let it go it makes no difference. I have held the switch and press the three right buttons and the three left buttons. turn both switches and pushed the buttons. what am I missing? this is my first Aristocrat machine. Title: Re: Aristocrat problems Post by: proten on January 11, 2013, 01:24:28 AM :211- so we know that we are working on the same machine.
Here is the reset steps I use to rest my MK IV. Title: Re: Aristocrat problems Post by: Mark1505 on January 12, 2013, 02:15:45 AM Thanks, I got it up and running. It's all working except the bill val. I will start working on this problem.
|