New Life Games Tech Forums

Arcade Games, Pinball, Crane Games, Redemption Games and Other Stuff => Other Arcade Games => Topic started by: dogcow on January 04, 2013, 01:46:53 AM



Title: piratejack 8-liner board questions
Post by: dogcow on January 04, 2013, 01:46:53 AM
i got a piratejack sweepstakes board for 8liner cabs, it has a very confusing manual. does anyone have these and can explain how to set it, whats the "key in rate/key out rate" . what does the "odds table" setting do?

basically just looking for some mroe clear guide on how to set and how to hook up my ICT ticket printer


Title: Re: piratejack 8-liner board questions
Post by: SLOT BUYER on January 04, 2013, 02:56:48 AM
Key in rate is the money in.
Key out rate is money paid out.
For ICT printer take yellow wire of printer harness and hook to your payout wire on the game.


Title: Re: piratejack 8-liner board questions
Post by: dogcow on January 04, 2013, 06:06:24 PM
do you know what line that is on the harness? in my cabinet the yellow wire off the ICT harness is connected to the "print ticket" switch.

http://www.coinop.org/kb_dl.aspx/KB/gametech/cherrymasterpinouts.html (http://www.coinop.org/kb_dl.aspx/KB/gametech/cherrymasterpinouts.html)

using that pinout, i am not seeing a payout line ? should it be connected to the same line as the key counter?


Title: Re: piratejack 8-liner board questions
Post by: SLOT BUYER on January 05, 2013, 06:11:14 AM
PRINT TICKET SWITCH? :103-
IT DEPENDS HOW THEY SET IT UP WHEN WHO EVER BUILT THE MACHINE!
SOUNDS RIGHT BUT CHECK IF THE WIRE FROM THE PRINT TICKET SWITCH IS GOING TO PIN 21 ON YOUR MAIN BOARD CONECTOR.
YOU HAVE TO KNOW HOW TO SET THIS STUFF UP. MAKE SURE THE HOPPER IS TURNED OFF IF YOUR USING A PRINTER.
GOOD LUCK
 :nlg-


Title: Re: piratejack 8-liner board questions
Post by: dogcow on January 05, 2013, 12:38:00 PM
PRINT TICKET SWITCH? :103-
IT DEPENDS HOW THEY SET IT UP WHEN WHO EVER BUILT THE MACHINE!
SOUNDS RIGHT BUT CHECK IF THE WIRE FROM THE PRINT TICKET SWITCH IS GOING TO PIN 21 ON YOUR MAIN BOARD CONECTOR.
YOU HAVE TO KNOW HOW TO SET THIS STUFF UP. MAKE SURE THE HOPPER IS TURNED OFF IF YOUR USING A PRINTER.
GOOD LUCK
 :nlg-

pin 21 solder side or parts side?

when you say hopper you mean counter? im not sure what "hopper" means