|
Title: S2000/vision game change This topic was moved here from old site Post by: opman on September 19, 2008, 01:09:56 PM How do you do a s2000 vision game program change ?
DJH Jackpot! Contributing Gold NLG Member. Re: s2000/vision game program change « Reply #1 on: July 05, 2008, 08:09:58 AM » -------------------------------------------------------------------------------- check the submit a new file section, there are a few doc's there that will help you. Really all you need to do is change eproms. Re: s2000/vision game program change « Reply #2 on: July 05, 2008, 08:49:41 AM » -------------------------------------------------------------------------------- After I put the eproms in ,and turn on the game, what will i see . and is there something that i have to do after that. A Step by step Procedure. DJH Jackpot! Contributing Gold NLG Member. Re: s2000/vision game program change « Reply #3 on: July 05, 2008, 09:12:34 AM » -------------------------------------------------------------------------------- There was another thread that someone documented the steps just the other day it's very easy, when you hear the beeping noise just turn the jackpot reset key until you see the screen say hit the CPU / MPU test button for 2-3 seconds (more like 4-5) and then it will say close the door, after the door is closed it will reset the game and you should be ok from there, it might beep again depending on a few things but if so just use the jackpot reset key to clear it etc Re: s2000/vision game program change « Reply #4 on: July 05, 2008, 12:48:20 PM » -------------------------------------------------------------------------------- If it's a vision machine like he said then the flash card change is involved too. DJH Jackpot! Contributing Gold NLG Member. Sr.Tech NLG Member 1000+ Post Re: s2000/vision game program change « Reply #5 on: July 05, 2008, 01:23:56 PM » -------------------------------------------------------------------------------- That is true! Also change the Flash cards if you are setting up a Vision game (With the upper screen) Re: s2000/vision game program change « Reply #6 on: July 05, 2008, 10:32:14 PM » -------------------------------------------------------------------------------- I'm not changing the game just updateing it. I'm updateing the game chips & the version chip & VFD to. Not changing the base chip . Does that matter. or do i still have to update the flash cards? Re: s2000/vision game program change « Reply #7 on: July 06, 2008, 10:32:41 AM » -------------------------------------------------------------------------------- Quote from: howie on July 05, 2008, 10:32:14 PM I'm not changing the game just updateing it. I'm updateing the game chips & the version chip & VFD to. Not changing the base chip . Does that matter. or do i still have to update the flash cards? If you get a protocal mismatch error when you change out the chips that means that your chips are not compatible with the Stepper Base or the drivers in the flash card and or the LCD firmware. Re: s2000/vision game program change « Reply #8 on: July 06, 2008, 04:47:28 PM » -------------------------------------------------------------------------------- if I get a protocal mismatch how do I get rid of it? do I have to do a ram clear. OR just put the old chips back. Re: s2000/vision game program change « Reply #9 on: July 06, 2008, 08:12:45 PM » -------------------------------------------------------------------------------- It may be easier than you think, you never know you may just get the right stuff !, I heard the last tip you got was correct |