|
Title: Machine hardly accepting coins Post by: jstraa on March 06, 2009, 07:06:21 PM I have an 550 upright, but it hardly accepts coins. (20 eurocent coins)
I replaced optics and the coin compatitor setting knob is full right, are there more ways to improve? It accepts only 1 in 10 coins now. Can I easily make it coinless with a button or switch? Title: Re: Machine hardly accepting coins Post by: jay on March 06, 2009, 07:13:02 PM When you say 1 in 10.... what happens to the other 9.
Are they being stolen in that they make it to the hopper without being registered as credits or is it dropping through to the coin tray.... If the coin is being rejected by the comparitor and being dumped to the coin tray then you either have to adjust the sensitivity on the comparitor or replace the coin mech. Is it a CC-16 or a CC-33 ? and what letter follows the number ? IF they are being stolen then either your optics need replacing or you need the proper coin spacer for the optics. Alternatively using a larger coin may be the quick fix. There is no easy way to make this coinless with a button. In Vegas coinless usially means using dollar bills only. Title: Re: Machine hardly accepting coins Post by: Jim on March 06, 2009, 07:16:43 PM try coin comparator full left or ccw, for less discrimination. should improve it drastically
Jim Title: Re: Machine hardly accepting coins Post by: jstraa on June 12, 2009, 09:14:29 PM I solved it (with some help) it had everything to do with the clear eprom I used, funny but so true!
|