|
Title: Williams 400 Ballast Problem? Post by: dale on March 07, 2009, 03:18:55 PM My Williams 400 has 2 Florescent light fixtures in the belly glass. The bottom one does not work (Changed tubes). Is this a ballast problem and is it accessed through the ballast box? I am slot challenged so I need very simple instructions. Thanks in advance.
Title: Re: Williams 400 Ballast Problem? Post by: cfh on March 07, 2009, 03:45:18 PM on the inside of the door there are 3 florescent starters.
these are available at home depot. the top one is for the florescent that lights the reel glass. the bottom two are for the belly glass. swap the lower two around and see if your problem changes. if it does, you need a new starter (and maybe a new florescent tube). Title: Re: Williams 400 Ballast Problem? Post by: dale on March 07, 2009, 04:14:42 PM The bottom starter was not properly seated. Thanks a lot, I have light! +Karma.
|