|
Title: Need help setting an S-2000 for hand pay Post by: erbs on February 07, 2013, 10:55:04 PM Hello, I would like to set the machine for hand pay only. I had read that I need to disable the printer setting and set hopper limit to zero is that correct? If so I cant see where to set the hopper limit. I have done the clear and keyed and ready to start over. Thanks for any help in advance.
Title: Re: Need help setting an S-2000 for hand pay Post by: cowboygames on February 08, 2013, 12:47:38 AM All limits, including hopper limit are set in menu 3. No keychip required, just make sure there are zero credits on the machine. Menu 7 is the only one that requires a key chip
Title: Re: Need help setting an S-2000 for hand pay Post by: erbs on February 08, 2013, 01:12:31 AM Thanks cowboygames, :3- I got it. I had read in a previous post that it was accessed with the key chip :60- and thats how I was trying to get to the setting. All is well :89- Thanks
|