New Life Games Tech Forums

**Reel Slots** Gaming Machines => Bally Reel Games. => Topic started by: SIMAR on March 08, 2009, 03:58:05 AM



Title: help me, initializing after clearin safe ram b-6000
Post by: SIMAR on March 08, 2009, 03:58:05 AM
initializing after clearin safe ram b-6000, there are many numbers and i dont know how continue. And coin comparator and the bill aceptor it's off, why??


Title: Re: help me, initializing after clearin safe ram b-6000
Post by: Bettor Slots on March 08, 2009, 05:02:26 AM
Bally 6000 Safe Ram Clear Procedure:

Install a U28 Bally 6000 Ram Clear in the U28 board eprom location...make sure tab is in the correct direction.

While holding the Psuedo coin and Test buttons on the board, turn the power on.  Continue to hold until you see a CLC, CLF or CLP in the win paid display.  Release the buttons after you see this. 

Power the machine down, replace the U28 Ram Clear with your original game chip.  Before turning the machine back on make sure coin hopper is in place, BV connected, and coin tray in place...also don't forget to reconnect the small wire to the front of the board.  Turn the machine back on and close the door.

If your board is populated with a U53 timekeeper (which it probably is and these are all the numbers you are seeing) you will be given the option of inputting the date and time after you turn it back on.  You can ignore this for a home use machine, instead just keep hitting the Bet Max button to move though all option fields or if you wish you can adjust and set the time/date settngs by hitting the Spin button to change and Bet Max to accept and move to the next field.  Fields are in this order (mm/dd/yy/day-of-the-week;-0=Sunday).  When you get to the last flashing field hit the Change / Service button one time which will exit you.  The game will reset, reels will spin, BV should give a green light, then should be good to go....if not then you have something else going on.  :25-

Good luck,

Jim