|
Title: DBV-45 to DBV-200 and Dip Sw settings Post by: cevers on February 10, 2013, 05:32:46 PM I just got an IGT S+ machine. I am trying to convert the DBV-45 validator to the DBV-200. I am currently waiting on the update chip for the software to accept the current bills and a new power supply since the old validator is 117V and the new is 12V. My problem is the dip switch settings. I know or I should say I think that 1 - 6 in Dip Sw1 should be set to off but I'm not sure about 7-10. I also am not sure about Dip Sw2 settings.
Title: Re: DBV-45 to DBV-200 and Dip Sw settings Post by: Ron (r273) on February 10, 2013, 06:23:18 PM If you don't have a manual here it is:
http://www.jcm-american.com/Libraries/Product_Manuals/DBV-200.sflb.ashx (http://www.jcm-american.com/Libraries/Product_Manuals/DBV-200.sflb.ashx) Ron (r273) Title: Re: DBV-45 to DBV-200 and Dip Sw settings Post by: cevers on February 10, 2013, 06:31:34 PM Thank you, I did see that and was still a little confused but I think I'm starting to get it. Next question is how do I know what software version I have to set the dip switch for? Whould that be on the chip?
Title: Re: DBV-45 to DBV-200 and Dip Sw settings Post by: Ron (r273) on February 10, 2013, 06:45:06 PM Thank you, I did see that and was still a little confused but I think I'm starting to get it. Next question is how do I know what software version I have to set the dip switch for? Whould that be on the chip? For S+ it is ID-022/023 Ron(r273) Title: Re: DBV-45 to DBV-200 and Dip Sw settings Post by: cevers on February 10, 2013, 06:46:12 PM Here is another dumb question I just thought of. Since I changed the DBV-45 whick is 117V to a DBV-200 that is 12V, Do I need to change the transport unit as well?
Title: Re: DBV-45 to DBV-200 and Dip Sw settings Post by: cevers on February 10, 2013, 06:48:31 PM It is in a IGT S+ Double Diamond manufacture date was 12/93 old validator had the numbers 022 on it
Title: Re: DBV-45 to DBV-200 and Dip Sw settings Post by: Ron (r273) on February 10, 2013, 06:51:21 PM Here is another dumb question I just thought of. Since I changed the DBV-45 whick is 117V to a DBV-200 that is 12V, Do I need to change the transport unit as well? It's been so long I dealt with a 200 but I believe you do. And may have to replace power supply with vent style. Ron (r273) Title: Re: DBV-45 to DBV-200 and Dip Sw settings Post by: cevers on February 10, 2013, 06:58:06 PM Thanks I did order a new power supply. I guess I will wait till it all comes in put it together and see what happens. worse case senerio I have to get a new transport unit as well. Thank you
Title: Re: DBV-45 to DBV-200 and Dip Sw settings Post by: Buzz on February 10, 2013, 09:14:38 PM 145 and 200 use the same transport.
Title: Re: DBV-45 to DBV-200 and Dip Sw settings Post by: cevers on February 10, 2013, 09:44:10 PM Thanks. The old unit was a DBV-45 not 145 if that makes a difference or not. I just got the meter out though and tested the leads and found that the power supply is 12V. Not sure why the old validator was marked 117V. Now I just have to wait for the eprom chip and see if I can figure out these dip switches.
Title: Re: DBV-45 to DBV-200 and Dip Sw settings Post by: Buzz on February 10, 2013, 10:25:11 PM As I recall the dip switches are all turned OFF. I've never seen a DBV 45 and didn't even know they made such a thing.
Title: Re: DBV-45 to DBV-200 and Dip Sw settings Post by: cevers on February 10, 2013, 10:53:03 PM Thanks for the help. Chip should hopfully be here in the next day or two. I will try with all the switches down.
Title: Re: DBV-45 to DBV-200 and Dip Sw settings Post by: coorslight115 on February 11, 2013, 01:54:41 AM Thanks for the help. Chip should hopfully be here in the next day or two. I will try with all the switches down. all switches off Title: Re: DBV-45 to DBV-200 and Dip Sw settings Post by: JCM Tech on February 11, 2013, 06:18:37 AM If the game uses IDO-022 interface, you need to turn #10 dipswitch on. The software on the chip supports both protocols and #10 is how you set it for either ID-022 or ID-023 protocol.
|