|
Title: Bally E-series error code "5" Post by: deanwaters on February 10, 2013, 08:21:53 PM Greetings. It's been awhile since I've posted to this AMAZING forum. Glad to be back again!
I have a Bally E-Series, 5-reel that's gone on the fritz. When I power it up, the machine goes into TILT mode and gives me a "5" in the payout display in the first (left-most) digit position. It may be trying to give me an error code of "50" as the 2nd digit position will have a "0" that sometimes flickers. Hard to tell. The hopper will also turn just enough to pay out one coin. Pressing the reset button doesn't do anything. Quite sad as this is a super fun machine. I'd love to bring it back to life. The machine is a 5-reel, 3-coin, 3-payline machine. One of the very first e-series as far as I know. Here's hoping someone can give me some advice.... I can up load pics if desired. Dean Title: Re: Bally E-series error code "5" Post by: OldReno on February 13, 2013, 11:31:42 PM Hi, and greetings.
You might have more luck on the Bally Reels board, where they talk about the electronic Ballys. I'm only good on the mechanical end of that.... |