New Life Games Tech Forums

**Video Slots** Gaming machines => IGT I-Game and Game King. => Topic started by: Trinidad on February 14, 2013, 10:18:31 AM



Title: Inverting Game King Monitor Image
Post by: Trinidad on February 14, 2013, 10:18:31 AM
Hi,

I have a whole lot of Game King slant top 17" Monitors but no slant tops. I know the image is upside down as opposed to the upright.

Can anyone tell me how to invert the image so that i can use the monitors can be used in the 17" Upright Cabinets?


Title: Re: Inverting Game King Monitor Image
Post by: nikstar on February 22, 2013, 07:11:00 PM
Ιt can be done but you have to invert two cables. From the CRT screen there is a connector with four cables coming fro the yokes. The two are for the horizontal and the other two for the vertical. I do not remember the colors but I can check it for you. If you invert the two with the vertical you can inverse the picture vertically. If you invert the two horizontal cables you will end up with the mirror effect on your picture. If you mix the horizontal with the vertical cables you will burn up something.
Off course there is another solution and more safer than this. To turn the screen upside down. It is just four bolds.


Title: Re: Inverting Game King Monitor Image
Post by: CVslots on August 26, 2013, 01:31:58 AM
So does anyone remember, offhand, which two cables need to be inverted? It's been awhile since we've done one, and, well, we obviously didn't take enough notes, or can't find the notes at all!  :72-

We have red, teal, gold, and brown....I remember you cut the connector in half, but can't remember which half to flip!!!!



Title: Re: Inverting Game King Monitor Image
Post by: CVslots on August 26, 2013, 01:47:46 AM
After reading some older threads, I'm thinking were going with flipping the gold and brown....PLEASE, if anyone knows different, let me know, this could get ugly...don't worry, of course I'll shield myself as Darrell does the dirty work, but would still like to k ow if we're in for a light show. God how I hate monitors...


Roz


Title: Re: Inverting Game King Monitor Image
Post by: cowboygames on August 26, 2013, 02:12:32 AM
Can't you just loosen the screw on the yoke and spin it 180 degrees on the neck of the tube?


Title: Re: Inverting Game King Monitor Image
Post by: Buzz on August 26, 2013, 03:08:03 AM
Roz  Maybe this will help and maybe not.  http://newlifegames.net/nlg/index.php?topic=248.msg2264#msg2264


Title: Re: Inverting Game King Monitor Image
Post by: Styx on August 26, 2013, 06:16:12 AM
Would it be evil to ask you to video it?  :97-

-Styx


Title: Re: Inverting Game King Monitor Image
Post by: Trinidad on August 26, 2013, 01:29:39 PM
I got the image reversed. Its simple. Just take the four wire jack coming from the yoke and seperate the brown and yellow wires from the blue and red. You cannot put them in the wrong placee because the jack would not alllow it. Just spin around the blue and red or the brown and yellow. This is so because diferent brands operate differently


Title: Re: Inverting Game King Monitor Image
Post by: CVslots on August 26, 2013, 09:46:58 PM
Excellent, that's what we needed to verify. Apparently, the harness is not long enough to 180 it.

Monitors scare me, but Darrell has learned enough lessons (the hard way) to know what NOT to do... :72-


Thanks guys! You know i'll be back if we have any problems!

Roz