|
Title: Bally 6000 Dip Switch position? Post by: stiney on February 16, 2013, 05:24:23 PM I need some one's help restoring the dip switch position, I have a Bally 6000 , Joey replaced the two chips (U-28, U-43) I need to know the proper switch position of the DS-1 & DS-2,
I started to do a ram clear after an error message got pulled away from the job half way through and now I don't remember the proper position of the switch's. Help... Dave Stiney Title: Re: Bally 6000 Dip Switch position? Post by: bruno on February 17, 2013, 05:52:46 AM Hi Dave,
The Manual says : DS1 SW1 Message Center ON Four-digit message center CREDIT and WIN PAID OFF Five-digit message center CREDIT and WIN PAID SW2 Reserved, Leave ON Title: Re: Bally 6000 Dip Switch position? Post by: paul on February 17, 2013, 02:11:40 PM What was the 28 and 43 that he changed do they stay in during a clear if so DS1 switch no 8 is on for clear and off when complete DS2 bank is for setting denom and the validator
|