|
Title: WBA 12 BV PROBLEMS :( Post by: WILDCHERRY21 on February 19, 2013, 12:01:33 AM OK guys i have been searching through the threads on BV issues but cant find a solution. So heres my situation. My S2000 took the first $20.00 bill, now doesn't accept any bill. It sucks it in but kicks it right back out. Did the bill test but it wont complete the test cause it kicks it right back out. I swapped the BV with the problem machine to another working machine and it works fine. Put the BV in from the other working machine to the problem machine and same problem it rejects it. So im not thinking its a BV issue. So then i checked limits and its set for the normal $3000.00. I also swapped cash cans and made sure they were seated right. No Luck. I'm running out of ideas. Its weird it took the first $20.00 then nothing after. :103- Anybody have any thoughts I'm all ears. Thanks
-Garett Title: Re: WBA 12 BV PROBLEMS :( Post by: WILDCHERRY21 on February 19, 2013, 01:50:33 AM Well i did some switching of parts of the WBA12/13 it worked for about 4 dollar bills then stopped made a bunch of goofy noises and Now I have a Bill Validator error Door Closure M now all three reels are humming and turning together very slow like its in a tilt and i cant reset them to normal. Powered it off a couple times and reels are still in tilt but its not saying tilt in any of the error messages. Not sure what is going on. Also noticed one of the WBA transports say WBA 22 on it. Could this be a issue? :99-
-Garett Title: Re: WBA 12 BV PROBLEMS :( Post by: dpalmi on February 19, 2013, 02:23:30 AM Open the door and with door open turn the reset key on the outside right of the machine. This will fix the reels from slow spinning. That error is caused when the machine sees a door open during the middle of a game/spin.
Dan #2 Title: Re: WBA 12 BV PROBLEMS :( Post by: WILDCHERRY21 on February 19, 2013, 02:59:02 AM Thanks Dan, right on the money :3-
-Garett Title: Re: WBA 12 BV PROBLEMS :( Post by: WILDCHERRY21 on February 19, 2013, 01:38:51 PM OK here is the lastest update. Got a working BV put it in the problem machine. It takes the first dollar no problem. The second dollar is rejected. So I pull the BV out and reseat it and its cycles as it should. I put another bill in it and it takes it. It takes the first Bill, wont take any after till you reseat the BV. Now I put the BV back in the Good Boy machine and there is no problem. Takes bills till its sick in the face. I think i have some gremlins. :99- :99- :99- Thanks
-Garett |