|
Title: Need help with my first S2000 Slot - Reel 3 Tilt Problem Post by: ucanwin on February 19, 2013, 05:57:48 PM Help badly needed with my first IGT S2000 Double Diamond Multi-Coin slot machine with hopper payout.
When I turned the machine on, it showed a Reel 3 Tilt. The 3rd reel moves about one symbol per spin. Earlier the spin was a little more. I tried swapping it with the 2nd reel, and it works fine in that position. So, I think that the problem lies elsewhere, but where? Can anybody help me? :208- Jerry Title: Re: Need help with my first S2000 Slot - Reel 3 Tilt Problem Post by: rjpohl on February 19, 2013, 06:25:25 PM make sure the reel is not rubbing anything (door, light, display). Some times you can see the interference by looking through the reel glass.
Title: Re: Need help with my first S2000 Slot - Reel 3 Tilt Problem Post by: ucanwin on February 19, 2013, 06:28:49 PM Thanks for the tip, but the 3rd reel spin is short, even when I turn it on with the door open.
Title: Re: Need help with my first S2000 Slot - Reel 3 Tilt Problem Post by: rjpohl on February 19, 2013, 08:08:47 PM Check connector
Title: Re: Need help with my first S2000 Slot - Reel 3 Tilt Problem Post by: Buzz on February 19, 2013, 11:47:52 PM I had a whole lot of reel tilts in machines using SG000155 game chips. If that's not the case with this machine, try reseating the eproms. ( can't hurt anything )
Title: Re: Need help with my first S2000 Slot - Reel 3 Tilt Problem Post by: ucanwin on February 19, 2013, 11:57:31 PM I have only had the machine for a little over a month now. It has been working just great, until yesterday when the reel 3 tilt appeared.
My machine has the SG000512 game chips. Would anyone know what the correct checksum is for them? I have tried reseating the eproms with no luck. The bad thing is, that I don't have another like machine or spare parts to swap with. Title: Re: Need help with my first S2000 Slot - Reel 3 Tilt Problem Post by: cowboygames on February 20, 2013, 12:10:52 AM I had that problem once and solved it by swapping the am chips on the MPU and keying through the codes that come up
Title: Re: Need help with my first S2000 Slot - Reel 3 Tilt Problem Post by: ucanwin on February 20, 2013, 12:14:55 AM Please excuse me for my ignorance, but exactly what are the AM chips? I am not familiar with that term. Also, where would I find replacement AM chips for my game?
Title: Re: Need help with my first S2000 Slot - Reel 3 Tilt Problem Post by: cowboygames on February 20, 2013, 12:30:06 AM A misspelling on my smartphone. Shoulda said RAM chips
Title: Re: Need help with my first S2000 Slot - Reel 3 Tilt Problem Post by: Buzz on February 20, 2013, 12:36:04 AM I don't have files for 512 so can't help you on the check sums.
Rob I missed you by 5 minutes yesterday at Joey's. Title: Re: Need help with my first S2000 Slot - Reel 3 Tilt Problem Post by: cowboygames on February 20, 2013, 12:48:05 AM Sorry I missed you, but that's about the way my luck ran all weekend Buzz :37- Dropped about 2k at the Bellagio knowing that playing on the strip is ALWAYS a losing proposition. Shoulda gone to the Station casinos or Southpoint... :30- :30- :30-
|