|
Title: Looking for advice on SG/version/DSV options Post by: wireless73 on February 25, 2013, 04:18:47 PM Hello. I picked up some machines this weekend and wanted to get some advice on setting up the boards. Everything listed below is how the machine sits today. My few questions are:
Should I leave all of the SB's alone since from what I read/researched they all seem correct? Should I put SG523's in them all instead of the 129's? The 129's seem worthless but I don't know if the 523 is the way to go for sure. Should I upgrade all of the Version chips to VS011GX0 (except the 5R machine) Are there specific DSV's for any of these? The 42 is somewhat boring to me so I was looking to buy some others if it makes sense to spend the money. Thank you in advance for your direction/opinions- Haywire Deluxe $1 3C 3R SB100177 SG000129 1 of 2 and 2 of 2 Version VS009VX0 DSV00042 non enhanced board Triple Double RWB .25cent 3C 3R SB100194 SG000129 1 of 2 and 2 of 2 Version VS009VX0 No Simm non enhanced board Triple 5x pay .25cent 3C 3R SB100168 SG000363 1 of 2 and 2 of 2 Version VS011GX0 DSV0042 non enhanced board Double Stars .01cent 9 lines 5R SB unknown (not marked) SG000363 1 of 2 and 2 of 2 Version VS011GX1 No Simm Enhanced board Ten times pay $1 2C 3R SB100069 SG000129 1 of 2 and 2 of 2 Version VS009VX0 No Simm Non enhanced board Title: Re: Looking for advice on SG/version/DSV options Post by: coorslight115 on February 26, 2013, 12:35:09 AM I would replace the 129's with 363, 523, 597 or 598. Leave the 363s in the ones that have it, they work good. You do not need to upgrade the version unless you want to add multi denom, then I suggest vs011gx1 or nx1. 42 simms should give good sound on most if you enable enhanced sounds in the menus.
Title: Re: Looking for advice on SG/version/DSV options Post by: wireless73 on February 26, 2013, 01:33:55 AM Thanks for replying, that is what my gut told me, just wanted to make sure I wasn't missing anything or had options to improve further.
|