New Life Games Tech Forums

**Video Slots** Gaming machines => BALLY Game Maker. => Topic started by: FOXSSLOTS1 on February 28, 2013, 07:52:54 AM



Title: GAMEMAKER - TOUCH SCREEN CALIBRATE
Post by: FOXSSLOTS1 on February 28, 2013, 07:52:54 AM
I have done the calibration on my gamemaker but there is an area of the screen that is out of align -  for example - KENO - when I touch a 5 - it activates the 6  -  isolated to a left side of the monitor. 


Title: Re: GAMEMAKER - TOUCH SCREEN CALIBRATE
Post by: ricker on March 01, 2013, 12:03:40 AM
Barry,

Did you try moving the screen as before?

http://newlifegames.net/nlg/index.php?topic=16302.0 (http://newlifegames.net/nlg/index.php?topic=16302.0)

Richard


Title: Re: GAMEMAKER - TOUCH SCREEN CALIBRATE
Post by: FOXSSLOTS1 on March 01, 2013, 08:17:27 AM
didn't try that - its been a while since I did that fix - thanks for reminding me,


Title: Re: GAMEMAKER - TOUCH SCREEN CALIBRATE
Post by: FOXSSLOTS1 on March 01, 2013, 01:44:03 PM
that didn't work - small area on the bottom left side only.   does affect the menu or options along the bottom - just the KENO numbers - some activate to the right of the one chosen - others above the number chosen.


Title: Re: GAMEMAKER - TOUCH SCREEN CALIBRATE
Post by: Jeff on March 01, 2013, 09:41:00 PM
Most likely the screen is scratched.. Look at an angle with a flashlight to double check!


Regards, ~Jeff


Title: Re: GAMEMAKER - TOUCH SCREEN CALIBRATE
Post by: FOXSSLOTS1 on March 01, 2013, 10:17:24 PM
you are right - there are small scratches on the screen in that area - bummer.


Title: Re: GAMEMAKER - TOUCH SCREEN CALIBRATE
Post by: FOXSSLOTS1 on March 07, 2013, 07:32:09 AM
anyone have a replacement screen for the touch screen?