New Life Games Tech Forums

Arcade Games, Pinball, Crane Games, Redemption Games and Other Stuff => Arcade Games **Video** => Topic started by: BR549 Auto Sales on March 04, 2013, 03:04:05 PM



Title: Big Buck Hunter Call Of The Wild not booting?
Post by: BR549 Auto Sales on March 04, 2013, 03:04:05 PM
I have a BBH  Call Of The Wild that all I am getting is a blue screen upon power up. The LEDs on the main board, are flashing a sequence of the 1st 3 LEDs (from top to bottom) and then just the 2nd LED. I can't hear the game coin up or the game playing. I can't hear the hard drive running upon power up either, but it was a little loud where it is located so i may be wrong on that. If it matters, the cpu is the red board type. Anyone know what the LED flashing sequence represents?

Thanks


Title: Re: Big Buck Hunter Call Of The Wild not booting?
Post by: miket on April 25, 2013, 04:58:54 PM
Are you still having issues? It sounds like your power supply voltage is low. The power supply looks like one that you would see in a PC except it has a voltage control one one side. I believe turning it counterclockwise increases the voltage. If that works and the game does start, go into the menu/system settings and adjust the voltage until it says OK.

Good luck and hope that works
Mike


Title: Re: Big Buck Hunter Call Of The Wild not booting?
Post by: BR549 Auto Sales on April 25, 2013, 05:35:10 PM
Thanks I will give that a try.