|
Title: i-game choptop cabinet laminate options ? Post by: teamclark4 on March 06, 2013, 11:23:09 PM Probably a dumb question, but my search on NLG did not turn up an answer... I have a chop top i-game with the standard black laminate for the cabinet exterior. Cracked in a few spots so i was looking to relaminate a section of it.. Does anyone sell pre-cut laminates for my igame? Or do i have to just buy a sheet from a hardware store and cut it the best i can ? Have checked a few slot machine parts sites and didn't see anything like that.
Would rather have a pre-cut piece to replace it with; as opposed to taking a chance on my cutting skills :60- . Since the edges look like they need to be perfect. Thanks for any feedback... Title: Re: i-game choptop cabinet laminate options ? Post by: OhioGaming on March 07, 2013, 12:55:02 AM If you can get the cracked piece off without to much damage then a company that makes cabinets and/or works with laminate should be able to cut out a new piece for you.
Title: Re: i-game choptop cabinet laminate options ? Post by: Harvs on April 10, 2013, 03:08:08 AM Probably a dumb question, but my search on NLG did not turn up an answer... I have a chop top i-game with the standard black laminate for the cabinet exterior. Cracked in a few spots so i was looking to relaminate a section of it.. Does anyone sell pre-cut laminates for my igame? Or do i have to just buy a sheet from a hardware store and cut it the best i can ? Have checked a few slot machine parts sites and didn't see anything like that. Would rather have a pre-cut piece to replace it with; as opposed to taking a chance on my cutting skills :60- . Since the edges look like they need to be perfect. Thanks for any feedback... Probably a dumb question, but my search on NLG did not turn up an answer... I have a chop top i-game with the standard black laminate for the cabinet exterior. Cracked in a few spots so i was looking to relaminate a section of it.. Does anyone sell pre-cut laminates for my igame? Or do i have to just buy a sheet from a hardware store and cut it the best i can ? Have checked a few slot machine parts sites and didn't see anything like that. My reply to a post earlier may be helpful. Would rather have a pre-cut piece to replace it with; as opposed to taking a chance on my cutting skills :60- . Since the edges look like they need to be perfect. Thanks for any feedback... http://newlifegames.net/nlg/index.php?topic=23592.msg184885#msg184885 (http://newlifegames.net/nlg/index.php?topic=23592.msg184885#msg184885) -The only difference in this case would be that you could use a glue to hold the chipped edges of the laminate down (if the edges around the chipped spots are loose), then use (I know it sounds odd, but works) GREEN drywall mud to smooth over the chipped areas. A light sand, then apply the vinyl of your choice. It has worked for me for a temp fix., and actually looks just as nice.. cost me about $25. I do plan on making templates this summer for numerous machines. Hope this helps. Harvey Title: Re: i-game choptop cabinet laminate options ? Post by: teamclark4 on April 10, 2013, 02:01:04 PM Thanks for the reply, i had seen your other post too.. I would be interested in one of your templates for the chop top i-game once you have them done; i would rather replace the whole thing instead of trying to fix the bad parts of the laminate. K+ to you.
|