|
Title: s2000 jackpot bell Post by: tmannon on March 13, 2009, 06:11:37 PM can anyone explain to me how to setup a jackpot bell on a s2000? i need it to ring for every credit won. also, the slots currently do not have a bell.
Title: Re: s2000 jackpot bell Post by: Railroad94 on March 13, 2009, 07:00:53 PM Welcome to NLG. On the wire harness along side the MPU and close to the backplane board you should see a connector not hooked up, two orange wires twisted together and a yellow w/black stripe , this is where the bell hooks up. The yellow/black is the ground.
Go in to options (3) and it will let you turn bell on for all pays or hand pays. The ones I have seen don't seem to ring very good on all pays and have not hit a jackpot yet :37- Title: Re: s2000 jackpot bell Post by: tmannon on March 13, 2009, 07:11:00 PM i cannot locate those wires.
Title: Re: s2000 jackpot bell Post by: Railroad94 on March 13, 2009, 07:35:41 PM This plug in center
Title: Re: s2000 jackpot bell Post by: tmannon on March 13, 2009, 07:39:12 PM found it...buried in the other cabling. thanks
Title: Re: s2000 jackpot bell Post by: tmannon on March 26, 2009, 02:46:36 PM after recieving my jackpot bell it has a different connection...i spliced the two ends but nothing....
Title: Re: s2000 jackpot bell Post by: Railroad94 on March 26, 2009, 07:02:00 PM Did you go in the options and enable bell on all pays? I did this and was still weak on the ring but hoping on a jackpot it will ring like it should.
Different connections ? Are you sure it is a S-2000 bell, What does the sticker have on it? |