|
Title: Sigma uv1700 clear procedure? Post by: cfh on March 14, 2009, 09:43:14 PM So i finally got a Sigma uv1700 clear chip.
Procedure for doing an "all clear" (to change to another game) is listed below. Title: Re: Sigma uv1700 clear procedure? Post by: cfh on March 15, 2009, 12:25:30 PM I hate it when i have to answer my own questions!
(http://www.pinrepair.com/slots/sigma/sig_clear1.jpg) (http://www.pinrepair.com/slots/sigma/sig_clear2.jpg) (http://www.pinrepair.com/slots/sigma/sig_clear3.jpg) (http://www.pinrepair.com/slots/sigma/sig_clear4.jpg) The "....... Dallas All Clear - COMPLETED PG" thing only takes but maybe 5 seconds as the dots progress, and then the memory is cleared. Power off and put the original Boot chip back in at U51 and reboot. (http://www.pinrepair.com/slots/sigma/sig_clear5.jpg) Here's the original BOOT chip back in at U51 and rebooted. After the initial memory check and CD ROM check percentage scenerio (takes a few minutes)... SUCCESS! (http://www.pinrepair.com/slots/sigma/sig_clear6.jpg) (http://www.pinrepair.com/slots/sigma/sig_boot8.jpg) This game is called "Lava": (http://www.pinrepair.com/slots/sigma/lava1.jpg) Title: Re: Sigma uv1700 clear procedure? Post by: a69mopar on March 15, 2009, 12:59:23 PM Sometimes that's a good way to learn these things. :3-
W Title: Re: Sigma uv1700 clear procedure? Post by: StatFreak on March 15, 2009, 01:03:54 PM I don't think that there are many people on the board with Sigma knowledge Clay. You're sailing in uncharted waters.
I'm glad to see that you were able to diagnose the issue. :131- :3- Title: Re: Sigma uv1700 clear procedure? Post by: Railroad94 on March 15, 2009, 01:14:24 PM :3- :3- Great job clay, just the pics of the board are new to me
Title: Re: Sigma uv1700 clear procedure? Post by: jay on March 15, 2009, 09:00:52 PM Nice looking game,
Ben at fannnins used to deal in Sigma Treasure wheels. Not sure how indepth his knowlege runs but you might want to look him up. Title: Re: Sigma uv1700 clear procedure? Post by: tacman on March 15, 2009, 09:03:43 PM I agree Clay, the graphics look pretty good. Let us know about the playability when you get the coin/bill val issues resolved. K+
Dan (tacman) Title: Re: Sigma uv1700 clear procedure? Post by: cfh on March 31, 2009, 04:38:53 PM Picked up a new version of the Sigma uv1700 "All Clear" chip (v1.02).
Does not appear to do anything really different. But the clear mesasge is more obvious and easier to see/read. I also picked up Set v1.00 and tried that. This also goes into socket U51, and is used after an All Clear. Game will then boot into a "Cabinet Setup" screen. This is after a "standard" boot (where it checks the CD Rom against the U52 chip, and reads the entire CD Rom). It then says "Loading...", but instead of the game coming up, the Setup Cabinet screen comes up (which frankly is available through most menus games anyway.) (http://www.pinrepair.com/slots/sigma/set_1.jpg) |