|
Title: 60-in-1 power wiring Post by: pleiner on April 08, 2013, 03:21:44 AM So building my first arcade; got the 60-in-1 bundle. I'm putting a surge protector power strip inside my cab to run by LCD computer monitor and the marque light.
Can I just hotwire a three-prog outlet into the two AC terminals and one Ground terminal on the power supply and plug it into the power strip? Or, do I have to run wires from the AC terminals through a fuse then to the power strip? Or is there another way to wire this up properly? Just want to make sure I don't blow-up my PCB the first time I plug it in. Thanks. Title: Re: 60-in-1 power wiring Post by: channelmaniac on April 08, 2013, 08:21:01 PM http://arcadecontrols.com/BBBB/acwiring.html (http://arcadecontrols.com/BBBB/acwiring.html)
Tried and true way of doing wiring in the bottom of a cabinet. Title: Re: 60-in-1 power wiring Post by: pleiner on April 08, 2013, 11:18:09 PM What a great link, thank-you so much.
|