|
Title: Help with bonus reel game Post by: opman on September 19, 2008, 10:15:35 PM I have a 4 reel kit for Freedom Stars (aka Super Spin Sizzlin 7s or Diamond Stars). The game has the standard 3 reels plus a 4th bonus reel. The problem is that the 4th reel is not recognized by the machine. In setting up the machine it spins up the standard reels but not the 4th reel. I keep getting Aux Reel Disconnected error and the machine locks out on that message. I have tried changing reel harnesses, I/O boards (both cabinet and door), even tried swapping out the bonus reel for a regular reel to make sure it's functional. Any ideas on how to get this kit going would be appreciated. The only other thing I can think of is that it need a specific version chip. I'm currently using VS009GX0. idesign Site Administrator Re: Help with Bonus Reel Game « Reply #1 on: May 31, 2007, 05:20:34 PM » -------------------------------------------------------------------------------- Well, I just checked the PSR for SG000149 and VS009GX0 is the correct version chip. So it can't be the version chip. DJH Jackpot! Contributing Gold NLG Member. Sr.Tech NLG Member 1000+ Post Re: Help with Bonus Reel Game « Reply #2 on: June 01, 2007, 07:10:56 AM » -------------------------------------------------------------------------------- The question is does the installed I/O card support the 4th reel or does it require a different onel? idesign Site Administrator Sr.Tech NLG Member 1000+ P Re: Help with Bonus Reel Game « Reply #3 on: June 01, 2007, 07:38:25 AM » -------------------------------------------------------------------------------- That's a good question. I did change both I/O cards to newer and updated cards but that didn't help either. I'm thinking it's a cabinet I/O card thing but I have no way of telling what card it required. -------------------------------------------------------------------------------- If it aint broke why mess with it!!!! kforeman I Get Paid To Work On Slot Machines Re: Help with Bonus Reel Game « Reply #4 on: June 06, 2007, 07:44:34 PM » -------------------------------------------------------------------------------- standby, i'll go look on one of our bonus reel games and let you know which I/O's are needed. brb Re: Help with Bonus Reel Game « Reply #5 on: June 06, 2007, 08:00:31 PM » -------------------------------------------------------------------------------- door I/O p/n 75427801 Rev B cabinet I/O p/n 75427601 Rev A also i noticed on reboot that the bonus reel spins before the other 3 when the machine is initializing. idesign Site Administrator Sr.Tech NLG Member 1000+ Post Re: Help with Bonus Reel Game « Reply #6 on: June 07, 2007, 03:45:16 AM » -------------------------------------------------------------------------------- Quote from: kforeman on June 06, 2007, 08:00:31 PM door I/O p/n 75427801 Rev B cabinet I/O p/n 75427601 Rev A also i noticed on reboot that the bonus reel spins before the other 3 when the machine is initializing. Thanks for that info. Since you have the machine, what version chip is in it? and what GME? I'm using SG000149. Also, I'm being told that the processor board in these machines is a newer rev. with the part number ending in 504. Can you confirm this? Thanks If it aint broke why mess with it!!!! idesign Re: Help with Bonus Reel Game « Reply #7 on: June 07, 2007, 03:58:47 PM » -------------------------------------------------------------------------------- Quote from: kforeman on June 06, 2007, 08:00:31 PM door I/O p/n 75427801 Rev B cabinet I/O p/n 75427601 Rev A also i noticed on reboot that the bonus reel spins before the other 3 when the machine is initializing. I checked those part numbers and they are the same so it must be something else. kforeman Re: Help with Bonus Reel Game « Reply #8 on: June 07, 2007, 06:38:23 PM » -------------------------------------------------------------------------------- i'm going to go try to replicate your problem on one of our machines...i'll post up any findings. also i'm just curious, did you convert these games to the bonus reel from a standard 3 reel game? Re: Help with Bonus Reel Game « Reply #9 on: June 07, 2007, 09:55:19 PM » -------------------------------------------------------------------------------- hey Jeff i couldn't get my machine to tilt Aux Reels Disconnected. when i had the bonus reel out i got Reels Disconnected. the reason i asked about the conversion is because there may be something else missing?? idesign Site Administrator Sr.Tech NLG Member 1000+ Post Re: Help with Bonus Reel Game « Reply #10 on: June 08, 2007, 03:01:43 AM » -------------------------------------------------------------------------------- Quote from: kforeman on June 07, 2007, 09:55:19 PM hey Jeff i couldn't get my machine to tilt Aux Reels Disconnected. when i had the bonus reel out i got Reels Disconnected. the reason i asked about the conversion is because there may be something else missing?? Yes, this is a conversion of a 3 reel vision ready machine. Not sure what else could be missing. The reel shelf came with a 5 reel harness that had a terminator in the 5th reel connector. I tried it with and without the terminator. Also tried switching from the 4th to the 5th reel connector too. It seems like a simple conversion by just plugging the harness in the mother board and backlight controller. If there is something missing not sure where it would be plugged in unless it goes inline with the reel harness or plugs in the I/O. Do you notice anything different when comparing it to a standard 3 reel machine? I wonder if the machine is locked in on 3 reels and if a CLEAR 97 will allow it to see the 4th reel. It's a pain setting the machine back up after using that chip but it may be worth a try. Brianzz Contributing Gold NLG Member. Sr.Tech NLG Member 1000+ Post Re: Help with Bonus Reel Game « Reply #11 on: June 08, 2007, 03:22:59 AM » -------------------------------------------------------------------------------- Have you tried a softer RAM clear to see if it'll see the 4th reel? idesign Site Administrator Re: Help with Bonus Reel Game « Reply #12 on: June 08, 2007, 03:45:37 AM » -------------------------------------------------------------------------------- The machine does a RAM clear on its own because all the chips are changed out on the board when they are first installed. DJH Jackpot! Contributing Gold NLG Member. Sr.Tech NLG Member 1000+ Post Re: Help with Bonus Reel Game « Reply #13 on: June 08, 2007, 12:09:20 PM » -------------------------------------------------------------------------------- Quote from: idesign on June 08, 2007, 03:45:37 AM The machine does a RAM clear on its own because all the chips are changed out on the board when they are first installed. Try the IVC97 clear as the above statement iss only a soft clear. Re: Help with Bonus Reel Game « Reply #14 on: June 08, 2007, 12:15:16 PM » DJH Jackpot! Contributing Gold NLG Member. Sr.Tech NLG Member 1000+ Post Re: Help with Bonus Reel Game « Reply #15 on: June 08, 2007, 01:21:05 PM » -------------------------------------------------------------------------------- Quote from: idesign on June 08, 2007, 12:15:16 PM Right, that's what I was suggesting in the other message above. Maybe this weekend I'll do that. Sounds good as that would be about all I can think of other then the original statement about the board part number being 504. Did you confirm that? kforeman Re: Help with Bonus Reel Game « Reply #16 on: June 08, 2007, 01:53:29 PM » -------------------------------------------------------------------------------- hey Jeff i agree that an all clear might solve your problem. just wondering, do you have a PCB mounted on the back wall next to the handlebox? it should be part number 76936300. it is the back light driver board. also there would have been a new reel wire harness for that board to connect to the driver board after the reels. there is also a harness that goes from the driver board to the front of the cabinet I/O. idesign Site Administrator Sr.Tech NLG Member 1000+ Post Re: Help with Bonus Reel Game « Reply #17 on: June 08, 2007, 02:04:32 PM » -------------------------------------------------------------------------------- Hoping Kris Foreman can confirm if a 504 board is in one of this machines. That may take some time as a gaming agent would be involved when pulling the board out of a machine. Kris, yes I have that PCB back light comntroller, new reel wire harness connected to the PCB and the harness to the cabinet I/O too. All that is for the backlit reels though and shouldn't make a difference but I had it hooked up anyway. I thried it with and without it. I'll do a IVC Clear 97 this weekend but I hate to do that. It's sure a pain setting up everything. idesign Site Administrator Sr.Tech NLG Member 1000+ Post Re: Help with Bonus Reel Game « Reply #18 on: June 08, 2007, 02:11:13 PM » -------------------------------------------------------------------------------- Kris, the reel harness that came with these kits is a 5 reel with the 5th reel connector folded up in the back of the shelf with a plug in it containing a blue wire jumper. I presume your machines have the same arrangement. Re: Help with Bonus Reel Game « Reply #19 on: June 08, 2007, 03:55:05 PM » -------------------------------------------------------------------------------- yep thats the way ours are too. the jumper is on the 4th plug with the 5th attached to the bonus reel. idesign Site Administrator Sr.Tech NLG Member 1000+ Post Re: Help with Bonus Reel Game « Reply #20 on: June 08, 2007, 04:06:21 PM » -------------------------------------------------------------------------------- Quote from: kforeman on June 08, 2007, 03:55:05 PM yep thats the way ours are too. the jumper is on the 4th plug with the 5th attached to the bonus reel. I made a mistake above. I just looked at the wiring schematic for a 5 reel harness and mine are hooked up the same way. It's hard to tell which connector is actually the 4th and the 5th, they are so short. The color coding of the wiring in the schematic helped. idesign Site Administrator Sr.Tech NLG Member 1000+ Post Re: Help with Bonus Reel Game « Reply #21 on: June 09, 2007, 08:55:01 AM » -------------------------------------------------------------------------------- Just did the IVC 97 Clear and it didn't help. I got the same error message in the end....AUX REELS DISCONNECTED Not sure where to go from here unless it does require a 504 processor board. idesign Site Administrator Sr.Tech NLG Member 1000+ Post Re: Help with Bonus Reel Game « Reply #22 on: July 28, 2007, 08:08:21 AM » -------------------------------------------------------------------------------- Finally got it working thanks to the help of a tech on the Delphi forum.Ê Ê The problem is that early S2000/Vision Ready and Vision machines are missing a set of wires in the harness connected to the cabinet I/O.Ê The fix is to connect a jumper to pin 14C of the cabinet I/O to A Ground. This is a really cool game.Ê All 4 reels spin with the bonus reel stopping last.Ê Bonus wheel has Haywire, 2X, 5X, 10X, bonus credit of 5, 10 and 100, and mystery nudge action too.Ê You name it it has it....even dazzle lights around the 4th reel, and backlit on all 4 reels.Ê Plus it announces whatever a bonus is (tells you what the bonus is) with the MM board simm 58.Ê Photo below. Oh, yes, I do have a mulit-denom version chip in the machine.Ê That's why is shows it in the VFD.Ê I was so excited that the machine finally came up I forgot the set the denomination, so it defaulted to pennies. ROCKET ROCKET Contributing NLG Member Sr.NLG Member 501 to 1000 Post Re: Help with Bonus Reel Game « Reply #23 on: July 28, 2007, 08:34:22 AM » -------------------------------------------------------------------------------- GREAT LOOKING GAME JEFF, now it does everything ?? the amount you WILL loose before a win ?? glad you got it fixed i knew it was bugging you .. im back rocket r273 Sr. Resident Rookie Contributing Gold NLG Member. Sr.NLG Member 501 to 1000 Post Re: Help with Bonus Reel Game « Reply #24 on: July 28, 2007, 01:53:33 PM » -------------------------------------------------------------------------------- Congratulations Jeff! I played a bonus reel game while I was in Laughlin a few weeks ago and won a little. The announcer was really cool. I thought at the time I would really like one for my next machine. If you ever compile a list of items it takes to do all that, I would like a copy. I for one, I'm very interested to know where to get all those components. Then my next problem would be to find someone to put it all togther . Ron Report to moderator Logged uniman Contributing Gold NLG Member. Sr.NLG Member 501 to 1000 Post Members Rating: 588 Online Posts: 716 Jenny Re: Help with Bonus Reel Game « Reply #25 on: July 28, 2007, 03:02:20 PM » -------------------------------------------------------------------------------- That looks really nice! Your persistance payed off. That's the first bonus 4-reeler I've seen outside a casino. Those back-lit reels look so good too! Post another pic when you get a big hit like "Ten Times Pay". « Last Edit: July 28, 2007, 06:20:00 PM by uniman » Report to moderator Logged idesign Site Administrator Sr.Tech NLG Member 1000+ Post Members Rating: 581 Offline Posts: 2484 Re: Help with Bonus Reel Game « Reply #26 on: July 28, 2007, 03:46:49 PM » -------------------------------------------------------------------------------- Quote from: r273 on July 28, 2007, 01:53:33 PM Congratulations Jeff! I played a bonus reel game while I was in Laughlin a few weeks ago and won a little. The announcer was really cool. I thought at the time I would really like one for my next machine.Ê If you ever compile a list of items it takes to do all that, I would like a copy. I for one, I'm very interested to know where to get all those components. Then my next problem would be to find someone to put it all togther . Ron Hey Ron, I got all the parts from Jim Masonis......Blue Ridge Slots. He has all the parts.....one stop shopping. It's pretty easy to install. Swaping out the reel shelf is the biggest job. You probably have half the connections set up already since you have backlit reels. You will have to change out the backlit controller to a different one if all you have is a 3 reel controller. If your machine is a 2001 or later you probably have the i/O connector already installed. All you need is a jumper to turn the 4th reel on. Report to moderator Logged -------------------------------------------------------------------------------- If it aint broke why mess with it!!!! idesign Site Administrator Sr.Tech NLG Member 1000+ Post Members Rating: 581 Offline Posts: 2484 Re: Help with Bonus Reel Game « Reply #27 on: July 28, 2007, 03:51:53 PM » -------------------------------------------------------------------------------- Quote from: uniman on July 28, 2007, 03:02:20 PM That looks really nice! Your persistance payed off. That's the first bonus 4-reeler I've seen outside a casino.Ê Those back-lit reels look so good too! Post another pic when you get a big hit like "Ten Times Pay". I Haven't hit a 10X or 5X pay yet.......lots of mystery reels action, 2X, Haywires, and bonus credits so far. The game seems to have a ton of little pays for the 98 percent payback I have it set at. It's one of those games that keeps you going for a long time. Report to moderator Logged -------------------------------------------------------------------------------- If it aint broke why mess with it!!!! StatFreak NLG Document and FAQ Writer. Sr.Tech NLG Member 1000+ Post Members Rating: 2541 Offline Posts: 3486 SpamBurgers! Proudly using all parts of the pig! Re: Help with Bonus Reel Game « Reply #28 on: July 28, 2007, 09:24:51 PM » -------------------------------------------------------------------------------- Contratulations on getting it up and running Jeff. Now I'm jealous! I played one of the 4 reel bonus machines in Vegas last year and didn't do very well, but it was fun and I know I'd enjoy it at home. Oh well... not right now. I'm looking at the cheap err, economy market right now: Universals. Report to moderator Logged -------------------------------------------------------------------------------- I found myself at NLG ..but got lost again on the way home. If found, please email me to myself. Thanks. Executive member in good standing of Rick's SMAA. Ehhh...What's Up Doc? Jay Coin-Op Links, Info and Web Sites Moderator. Sr.Tech NLG Member 1000+ Post Members Rating: 396 Offline Posts: 4149 If you cant afford to lose, you cant afford to win Re: Help with Bonus Reel Game « Reply #29 on: July 29, 2007, 10:20:26 AM » -------------------------------------------------------------------------------- Excellent piece of engineering work Jeff. Scary how much these things are morphing towards the Pachislo look.... A couple of questions: Out of curiosity can you still insert all of your S+ chips with that installed and just hide that forth reel ? or do you have to undo all of your hard work. How many 4 reel games are there or are you pretty much stuck with the one theme ? Report to moderator Logged -------------------------------------------------------------------------------- The only way to beat the casino is to own it. idesign Site Administrator Sr.Tech NLG Member 1000+ Post Members Rating: 581 Offline Posts: 2484 Re: Help with Bonus Reel Game « Reply #30 on: July 29, 2007, 11:07:29 AM » -------------------------------------------------------------------------------- Quote from: Jay on July 29, 2007, 10:20:26 AM A couple of questions: Out of curiosity can you still insert all of your S+ chips with that installed and just hide that forth reel ? or do you have to undo all of your hard work. How many 4 reel games are there or are you pretty much stuck with the one theme ? The reel shelf and reel harness must me removed and switched back to the 3 reel shelf and harness which is hedl in place on the back of the shelf. There are only 3 screws holding the slef in. The backlit controller runs 3-5 reels so that can be remain even if no backlit reels are used. The reel glass has to be changed back to 3 reels since the reels are moved over to the left to mack room for the 4th reel. The dazzle light are just an inline connection to the mother board so that a quick disconnect. The only other thing left is the added connection to 14C on the cabinet I/O and I the harness up with a jumpers so all I do is pull the jumper out of the circuit to disable it. So it's a 15-20 minutes job at the most to make it back to a 3 reel machine. The game I am playing is Diamond Stars but typical of IGT, it has clones..........AKA Freedom Stars and Super Spin Sizling 7s. There are several other 4 reels games listed on the IGT web site like Big Time Pay and it's clones. In the future, I would like to try the conversion to a 5 reel game. They are pretty popular in the casinos but that would entain changing out the bet deck to do it correctly. The S2000 is a pretty modular machine so componenets can be changed out without too much effort. Report to moderator Logged -------------------------------------------------------------------------------- If it aint broke why mess with it!!!! Railroad94 Contributing Gold NLG Member. Sr.NLG Member 501 to 1000 Post Members Rating: 156 Offline Posts: 746 Re: Help with Bonus Reel Game « Reply #31 on: July 29, 2007, 12:34:21 PM » -------------------------------------------------------------------------------- Happy to hear that all is well with the conversion. My vision I don't think will ever be A true vision or even A 4 reel but it's great to know that it's possible. Thanks for all the sharing Jeff Report to moderator Logged idesign Site Administrator Sr.Tech NLG Member 1000+ Post Members Rating: 581 Offline Posts: 2484 Re: Help with Bonus Reel Game « Reply #32 on: July 29, 2007, 12:42:42 PM » -------------------------------------------------------------------------------- This machine has come a long way. It started out as a 9" Vision Ready. Added backlit reels and swapped out the 9" for a Round Top with ears speakers. Then added the Vision kit. Then added the speaker tray. Then changed it to a 4 reel machine. I'm ready to be a slot tech when I retire in Las Vegas Report to moderator Logged -------------------------------------------------------------------------------- If it aint broke why mess with it!!!! Railroad94 Contributing Gold NLG Member. Sr.NLG Member 501 to 1000 Post Members Rating: 156 Offline Posts: 746 Re: Help with Bonus Reel Game Blueridgeslots SLOT SERVICE Contributing Gold NLG Member. Sr.NLG Member 501 to 1000 Post Members Rating: 272 Offline Posts: 849 Phone 703 730-0821 Re: Help with Bonus Reel Game « Reply #34 on: July 30, 2007, 07:24:12 PM » -------------------------------------------------------------------------------- The button panel is removeable on the S-2000, when you get the other parts you will get the button panel and harness as well, when a IGT (either reel or video) uses a second row of buttons, a second I/O card is added, the 5 reel games are the hottest money makers for a casino, that's why they are changing out the 3 reel games to 5 (at 5800 a crack in new parts) Railroad94 Title: Re: help with bonus reel game Post by: blueridgeslots on September 19, 2008, 11:47:00 PM Remember the Jumper
Title: Re: help with bonus reel game Post by: opman on September 19, 2008, 11:59:41 PM This is a post I moved from the old site to the new site for future reference as we may all need it in the future. I will help in trying to move over some info from the old site to the new site.
|